It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

How to Manually Install the Licenses for the Control Center

  • Last updated on

You must license the Barracuda NextGen Control Center before adding managed F-Series Firewalls. The licenses for the Control Center are associated with the hardware ID of the system. The MAC address of a network card, the main board ID, or the CPU ID are used as the key for the licenses. The base license must be installed on the box layer and in the Control Center management interface.

In this article:

Before You Begin

Make sure the Control Center is license is installed and activated on the box layer. For more information, see Licensing.

Step 1. Export the Base License on Box Layer

  1. Log into the box layer of the Barracuda NextGen Control Center. If the Barracuda NextGen Control Center is running on a HA cluster, log into the primary unit.
  2. Open the CONFIGURATION > Full Config > Box > Box Licenses page.
  3. Click Lock.
  4. In the Licenses table, select the Base License and click Im/ Export and select Export to clipboard.

Step 2. Import the Base License

  1. Log into the Barracuda NextGen Control Center.
  2. Open the CC Identity page (Config > Global Settings > CC Identity).
  3. Click Lock.
  4. In the CC Identification section, click Import and select Import from Clipboard.
  5. In the Organization field, enter your organization name.
  6. Click Send Changes and Activate.
Last updated on