We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

How to Create NAT Tables (Translation Maps)

  • Last updated on

NAT Tables are an expanded type of source NAT for a network or IP address range. The NAT Tables connection object rewrites the source IP address to a source NAT IP address range. To rewrite both the destination and the source address of the connection, you can choose to use a NAT Table connection object with a MAP access rule. You can enter multiple rewriting maps, which are are processed from the top to the bottom. The first matching rewrite map is used.

fw_nat_table.png

Create a NAT Table connection object

  1. Go to CONFIGURATION > Configuration Tree > Box > Virtual Servers > your virtual server > Assigned Services > Firewall > Forwarding Rules.
  2. From the left menu, click Connections.
  3. Click Lock.
  4. Right-click the table and select New > NAT Table.
  5. Enter a Name.

  6. (optional) Select Use Same Port to disable port address translation.
  7. (optional) Enter the connection Timeout in seconds. Default: 30 seconds
  8. Click + to add an entry to the NAT Table list:
    • Original Network – Enter the source IP range or network.
    • Translated Base IP – Enter the network that you want the source IP address or network to be rewritten to.
    • Proxy ARP – Select the check box unless the destination network is connected by a layer 2 bridge to the source network.
    nattable_01.png
  9. (optional) Use the up and down arrows to sort the entries in the NAT Table.
  10. Click OK.
  11. Click Send Changes and Activate.

Apply the NAT Table to an access rule

To apply a NAT Table object to an access rule, select the object from the Connection Method list in the access rule settings.

FW_CO_NATTables02.png

Last updated on