It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

How to Create Network Objects

  • Last updated on

Create a network object containing an IP address, a reference to another network object and a network.

Do not change the dynamic network objects that are automatically generated by the F-Series Firewall or Control Center.

Create a Network Object

  1. Go to CONFIGURATION > Configuration Tree > Box > Virtual Servers > your virtual server > Assigned Services > Firewall > Forwarding Rules.
  2. In the left menu, click on Networks
  3. Click Lock.
  4. Right-click the table and select New. The Edit/Create Network Object window opens.  
  5. Enter a Name for the network object. E.g., ExampleNetworkObject
  6. In the Include Entries section, click + . The Edit/Create Include Entry window opens. 
  7. For each Include Entry:
    1. Enter the IP address that should be included in the IP field. 
    2. (optional) Enter the MAC address. This is evaluated only when the network object is used as the Source in an access rule. 
    3. (optional) Enter the Interface. This is evaluated only when the network object is used as the Source in an access rule.
    4. Click Insert to add additional entries, or Insert and Close to insert when your are done.
  8. In the Exclude Entry section, add the IP addresses that should be excluded from the rule.
  9. Click OK.
  10. Click Send Changes and Activate.

You can now use the network object in your access rules. When creating or editing an access rule click on the Object Viewer in the left menu to see a list of all available network objects.

Last updated on