We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

FSC Link Selection

  • Last updated on

Link selection allows you to configure a fallback connection for your Secure Connector. When the primary interface is down, traffic is routed over the backup interface to the Secure Access Concentrator. By default, the gateway of the interface is probed every five seconds, but you can also configure an explicit probing target.

Before you begin

Configure two WAN connections for the FSC. Fore more information, see FSC WAN Connections.

Configure FSC link selection
  1. Go to your cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Double-click to edit the device or FSC template.
  4. In the left menu, click Routing Settings.
  5. In the Link Selection section, click the Enable Link Selection check box.
  6. From the Primary Interface list, select the default connection.
  7. From the Backup Interface list, select the backup connection.
  8. (optional) Enter an IP address reachable through the primary interface as the Explicit Probing Target.
  9. Click OK and Activate.
Last updated on