The caching DNS service is a box level service that acts as a DNS proxy to speed up DNS queries. Do not run both the forwarding/caching DNS (bdns) service and a DNS service on the virtual server. The forwarding/caching DNS (bdns) configuration will collide with the DNS service. The caching DNS service listens on 127.0.0.1 and is accessed by the clients via an app redirect access rule in the forwarding ruleset. Depending on the rule, all DNS traffic can be routed over the DNS proxy, securing against misconfigured clients and servers attempting to use non-authorized external DNS servers.
In the DNS Query ACL table, add the IP range for the networks allowed to access the caching DNS server. Add 0.0.0.0/0 to allow everyone. Since the firewall services also use IP to communicate with the caching DNS service, these IP addresses must be added to the ACL to allow them to connect.
Step 1. Configure caching DNS settings
- Go to CONFIGURATION > Configuration Tree > Box > Administrative Settings.
- From the Configuration Mode menu, select Switch to Advanced View.
- In the left menu, click Caching DNS Service.
- Click Lock.
- From the Run Forwarding/Caching DNS list, activate the local caching/forwarding DNS service.
- From the Run Slave DNS list, activate a local slave DNS service if applicable. Configure the settings as described in How to Configure DNS Settings.
- From the Query Source Address list, select which IP address to use as source address when querying the DNS or Master DNS servers. You can select one of the following options:
- Wildcard (default) – IP selection is accounted for dynamically according to definitions in the routing table.
- VIP (managed firewalls only) – Uses the firewall's VIP IP address.
- MIP – Uses the system’s management IP address, which is the Main Box IP.
- Other – Select this check box to explicitly specify an IPv4 or IPv6 address.
In the DNS Query ACL table, add the single IPv4 / IPv6 addresses or netmasks that can access the DNS service via an App Redirect access rule.
- Enable Log DNS Queries to log every DNS query.
Click Send Changes and Activate.
Step 2. Create an App Redirect access rule
- Action – Select App Redirect.
- Source – Select the client network.
- Service – Select DNS.
- Destination – Select Any.
- Redirection – Enter the IP address and port the caching DNS service listens on.