We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

How to Create FSC Firewall Rules

  • Last updated on

FSC firewall rules can only be configured via the Secure Connector Editor on the Control Center. To allow traffic between two zones, you must create two rules with the source and destination zones interchanged.

Create an FSC Firewall Rule

  1. Go to your cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Double-click to edit the device or template.
  4. In the left menu, click Firewall Settings.
  5. (Template only) Enable the check box for Firewall Rules. Any existing firewall rules on Secure Connectors using this template will be overwritten.
  6. Click + to add a Firewall Rule.
    FW-Rule_01.png
  7. Enter a Name and click OK. The Firewall Rules window opens.
  8. Configure the firewall rule:
    • Action – Select ACCEPT or BLOCK.
    • Source Zone – Select the firewall zone associated with the source IP address of the connection.
    • Destination Zone – Select the firewall zone associated with the destination IP address of the connection.
  9. (optional) Enter a Description.
  10. (optional) In the Exception list, click + and enter an IP address the rule should not match for.
    create_rule.png
  11. Click OK.
  12. Click OK and Activate.

Delete an FSC Firewall Rule

  1. Go to your cluster > Cluster Settings > Secure Connector Editor.
  2. Click Lock.
  3. Double-click to edit the device or template.
  4. In the left menu, click Firewall Settings.
  5. Select the firewall rule you want to delete in the Firewall Rules, Firewall Management, Source NAT, or Destination NAT lists.
  6. Click delete_icon.png.
  7. Click OK and Activate.
Last updated on