The KVM version of the Barracuda NextGen Firewall F-Series Vx is available as a pre-built image for your KVM hypervisor.
Before deploying the Barracuda NextGen Firewall F-Series Vx unit, verify that the host system meets the minimum storage requirements and review the resource recommendations for the production system.
Before You Begin
- For information on the sizing of your CPU, disk, and RAM, see
- Download and install a VNC viewer.
- Configure the virtual network on the KVM host server.
- Download the KVM image for the Barracuda NextGen Firewall F-Series Vx from the Barracuda Download Portal.
Step 1. Import and Start the Barracuda NextGen Firewall F-Series Vx VM
Execute the install script to deploy the image and use virsh to define and start the virtual machine.
Log into the KVM host server with root permissions.
Copy the Barracuda NextGen Firewall F-Series Vx KVM install file KVM host server (e.g., install.GWAY-5.4.4-071-VFxxx.kvm.sh).
Make the file executable
chmod +x install.GWAY-5.4.4-071-VFxxx.kvm.sh
Start the install script.
- (optional) Enter the name and path you want the image file deployed to. Press Enter to use the default value.
- (optional) Enter the path for the configuration file. Press Enter to use the default value.
- Choose non-sparse deployment for production deployments, sparse for testing purposes.
- Enter the domain name for the deployment. Press Enter to accept the default value suggested
Enter the MAC for virtual network interface. Press Enter to accept the default value suggested.
- (optional) Depending on the network configuration of your KVM host you must adapt the network settings in the xml configuration file. Per default the configuration file is stored in /etc/libvirt/qemu.
- Connect to the virtual console.
virsh --connect qemu:///system
Import the configuration file.
Start the virtual machine.
The virtual Barracuda NextGen Firewall F-Series Vx is now running on the KVM hypervisor.
Step 2. Configure the Barracuda NextGen Firewall F-Series Vx on First Boot
Connect to the console of the VM to enter the minimal network configuration.
- Use a VNC client to connect to the IP address of the KVM host server. A console appears and displays the screen output of the Barracuda NextGen Firewall F-Series Vx that is running on the KVM server. For a basic network configuration, the Active Recovery Technology (ART) menu launches.
- Select Basic Configuration, enter the following network settings, and then press F3 to save your changes:
- Hostname – A hostname for your Barracuda NextGen Firewall F-Series Vx unit.
- Management IP – The internal IP address for your Barracuda NextGen Firewall F-Series Vx unit. This IP address must be reachable from your PC (e.g.,
- Netmask – The subnet mask (e.g.,
- Default Gateway – The IP address of the next hop device that serves as an access point to another network (e.g.,
- Press F3 to save the configuration.
- Select Reboot. The Barracuda NextGen Firewall F-Series Vx restarts with the new network configuration.
After you deploy the Barracuda NextGen Firewall F-Series Vx unit, continue with Getting Started and optionally Best Practice - Performance Tuning on KVM Hypervisors.