We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

How to Display the Barracuda UMTS Modem IMEI

  • Last updated on

If you want to get the IMEI and/or software version information of an attached USB UMTS modem (M10/M11), you can do so on the command line using minicom.

Step 1. Change the Minicom Serial Port to the UMTS Modem

  1. Connect to your Barracuda appliance on the shell as the root user.
  2. Stop the UMTS connection with the command: [root@ng:~]# /etc/phion/bin/openumts stop
  3. Start the minicom setup with the command: [root@ng:~]# minicom -s The text-based minicom menu is displayed.
  4. Select Serial port setup
    minicom1.png
  5. Select A >Serial Device and change this to /dev/ttyUSB2 or /dev/ttyUSB1 depending on which USB port the modem is connected to.
  6. Press Enter.
    minicom2.png
  7. Select Save setup as dfl.
  8. Select Exit from Minicom.

This setting is now configured as default for minicom.  

Step 2. Enter the AT Command to Display the Modem Details

  1. Start minicom with the default settings:
    [root@ng:~]# minicom
  2. Enter the AT command:
    ATI
    .
    If you want the software version also enter
    AT+LCTSW
    The output will be shown as follows:
    minicom-input.png
  3. To leave minicom, press Ctrl+a and z and select q to exit.

Step 3. Restart the UMTS Connection

Restart the UMTS connection:
[root@ng:~]# /etc/phion/bin/openumts start

Last updated on