We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

How to Display the Control Center Box Layer on the Status Map

  • Last updated on

Since Control Centers have the same foundation on box level as NextGen Firewalls, Control Centers can display both unmanaged firewalls and the box level of Control Centers in the status map. If the name of the Control Center is arbitrarily chosen, it may appear at any position within the list. To determine the range and cluster the unmanaged firewall or box level of the Control Center is displayed in apply the following naming scheme: Name_Cluster-Name_Range-Number. Replace Name, Cluster-Name and Range-Number with the corresponding information of your setup.

no_cc_in_status_map.png

Step 1. Export the Box Certificate of the Control Center

  1. Log into the Control Center on box layer.
  2. Go to CONFIGURATION > Configuration Tree > Identity.
  3. In the Box Certificate section, click Ex/Import.
  4. Click Export Public to Clipboard.
    export_box_private_key.png

Step 2. Add the Control Center Box Layer to the List of Boxes to be Displayed in the Status Map of a Control Center

  1. Log into the Control Center.
  2. Go to CONFIGURATION > Configuration Tree > Multi-Range > Global Settings > CC Parameters.
  3. Click Lock.
  4. In the Status Map Setup section, click + to add an entry for your Control Center to the External Boxes list.
  5. Enter the name for your Control Center.
  6. Configure the values for your Control Center:
    • Visible Name – Enter the visible name of the external unit in the form: Name_Cluster-Name_Range-Number, i.e. CC3_Cluster1_1.
    • Disable – Select n.
    • Description – Enter a description for your Control Center.
    • IP Address – Enter the box level IP address of your Control Center, i.e., 10.0.10.37
    • Box Public Key – Click Ex/Import and click Import from Clipboard.
      enter_cc_data.png
  7. Click OK.
  8. Click Send Changes and Activate.

Step 3. Verify that the Control Center is Now Displayed in the Status Map of the Control Center.

  1. Go to CONTROL > Status Map.
  2. Click the Refresh icon to reload status map data.

Your Control Center is now visible in the Status Map.

cc_in_status_map.png

Last updated on