It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

DASHBOARD General Page

  • Last updated on

The General page displays a summary of the Barracuda CloudGen Firewall system status. To access the General page, open the DASHBOARD tab and click the General icon in the ribbon bar.

The following elements are available:

  • Appliance
  • Status
  • License
  • Interfaces
  • Message Board
  • Updates
  • Services
  • Overall Throughput
  • Resources
  • Administrators Logged In
  • Recent Severe Events
  • Cloud Information
  • Advanced Threat Protection

Appliance

The Appliance element displays information about your system, such as product model, hostname, serial number, etc.

db_general_01.png

The Control Center section indicates if the firewall is centrally managed by a Barracuda Firewall Control Center and shows the IP address of the corresponding appliance. If the system is part of a high availability (HA) cluster, an additional section (HA Secondary) displays the IP address of the secondary unit.

Advanced Threat Protection

If ATP is configured, the Advanced Threat Protection element displays the operational status of the ATP server.

batp_element.png

The status can be one of four possible options:

dashboard_atp_status_0.png

dashboard_atp_status_1.png

dashboard_atp_status_2.png

dashboard_atp_status_3.png

Status

The Status element displays the status of the virtual servers and services running on the firewall. It also shows the health status of network connections and the licensing status of the system.

db_general_06.png

The Admin Tasks section indicates if events were generated and if actions should be taken by the administrator. The Resources section shows the status of system resources.

License

The License element displays the current license and activation state of the firewall.

db_general_02.png

Interfaces

The Interfaces element shows the port configuration for your firewall. The color of the port (light or dark gray) shows if a valid configuration for this port is present. The colored status overlay shows the connectivity of the port: unplugged, connected with less than full speed, or connected with full speed. All ports are displayed in the same location and with the same port names as on the physical appliance. The mouse-over for each port shows the configured IP addresses and direct-attached network routes as well as the connection information. All bridges and Ethernet bundles are listed below the port diagram. The mouse-over for the bridging and Ethernet bundle interfaces highlights the associated ports in the interface element and, if applicable, also displays the IP addresses or networks associated with the device. Built-in network switches, like on models F180/280, are inidcated as connected to the firewall via a green overlay. In case virtual routers are configured, each namespace of a virtual router is displayed with its assigned interfaces. Hovering over the namespace highlights the interfaces in the related color.

interface01.png

interface02.png

vrf_interfaces.png

Port Types
Port IconPort Type
interface_not_configured.pngSFP or SFP+
interface_not_configured2.pngRJ45
Port Status
 Port Configured on CloudGen FirewallCable Plugged In
interface_not_configured.png interface_not_configured2.pngNon/a
interface_configured_not_pluggedin.pngYesNo
interface_configured_full_speed.pngYesYes, using the rated speed of this port. E.g., 1 GB port connected to a GB switch.
interface_configured_limited_speed.pngYesYes, using a lower speed than the rated speed of the port. E.g., 1 GB port connected to a 100 Mbit switch.

Message Board

The Message Board element displays communication from Barracuda Networks, the welcome message, and the Barracuda warranty and software license agreement. Product Tips is only enabled for freshly installed units. Go to CONFIGURATION > Configuration Tree > Box > Advanced Configuration > Message Board and enable Barracuda Networks product Tips to receive product tips on updated units.

product_tips.png

To clear the message of the day, click Mark as Read.

Security Subscriptions

The Security Subscriptions section displays the security features and provides subscription details.

subscription_status_element_01.png

The icon displayed depends on whether the firewall is licensed, whether the firewall is running in grace mode, and whether a licensed service is enabled. The following table shows the type of icon with regards to any combination of these states:

IconDisplayed StatusService LicensedFirewall in Grace ModeService Enabled
licensed_00.pngGreen (OK)YesNo-
icon_warning.pngYellow (Warning)YesYes-
licensed_disabled_00.pngRed (Error)No-Yes
not_purchased_00.pngGray (Not Available)No-No

Inside a subscription block, each feature is described by its individual attributes.

Blue arrows to the right of each subscription line indicate options that can be displayed or modified by clicking the associated link entry.

Updates

The Updates element shows all available and installed updates for your CloudGen Firewall. Click the download icon (download_icon.png) to download the update archive. Click the Installed tab to see which updates or hotfixes are already installed on this unit. By default, the update element is disabled. To enable Update Notifications, go to CONFIGURATION > Configuration Tree > Advanced Configuration > Firmware Update.

In order to provide you with a list of updates applicable for your system, your CloudGen Firewall will transmit the firmware version and serial number to the Barracuda Cloud each time the list of available updates is updated.

fw-update02.png fw-update03.png

Download and Install Options

The Updates element provides several functions when clicking the download icon (download_icon.png) next to a link.

fw-update04.png

  • Download – Downloads the update file and adds an arrow icon to the link. Click this icon to install or remove the file.
    fw-update05.png 
  • Download and Install – Downloads and installs the update file.
  • Download with your default Browser – Opens an Explorer window and lets you chose the file location.
  • Copy Download Link to Clipboard – Copies the download link to the clipboard, e.g., https://d.barracudanetworks.com/ngfirewall/hotfixes/7.0.x/test-1020-7.0.0-1.tgz
Update Dependencies

Some updates require installation of earlier download files. To view dependency chains, expand the link.

fw-update06.png

Downloads with unmet dependencies are marked with a yellow warning triangle (download_icon_warning.png). Expand the item and install all dependencies to install this update.

Blocked downloads are marked with a red warning icon (download_icon_block.png) that becomes visible when hovering the mouse over the link.

fw-update08.png

Services

The Services element shows the status (enabled or disabled) of box and server services running on the firewall.

db_general_03.png

Clicking the arrow icons next to the entries provides the corresponding links to the Server page, where you can view the status of your virtual servers and services.

Overall Throughput

The Overall Throughput element provides a live view of the overall traffic handled by the system.

db_general_08.png

Click the link on the top right of the element (Last 24H) to change the time display interval.

Resources

The upper section of the Resources element displays the system load (CPU Load) and the amount of RAM (Memory Usage) used and still available.

db_general_09.png

Expanding the Disk Space section, which displays the used and available disk space, provides the following information about your system resources:

  • System – Displays the used and available disk space of the system partition (root).
  • Data – Displays the used and available disk space of the data partition (/phion0).
  • ART – Displays the used and available ART disk space.
  • Boot – Displays the used and available Boot disk space.

Administrators Logged In

This element displays details about connected administrators.

db_general_05.png

Recent Severe Events

This element displays a list of recent events with a severity of warning and above.

db_general_10.png

Cloud Information

The Cloud Information element shows which cloud the firewall is running in (Azure, AWS, or Google Cloud) and if it is connected to the cloud fabric. It also displays the name of the VM instance in the cloud. This makes it easier to find your firewall VM in the AWS, Azure, and Google Cloud management portals.

cloud_information_aws_01.png

cloud_information_element.png

google_cloud_dashboard_element.png