We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

SC2

  • Last updated on
SC2 Top View

FSC2.0.top.png

SC2 Front View

SC2.front.png

Default Port Configuration

Port Label OS Notation Speed/Type Management Port
WAN eth1 10/100/1000 MBit RJ45 (Management Port)
LAN1 eth0 10/100/1000 MBit RJ45 n.a.
LAN2 eth3 10/100/1000 MBit RJ45 n.a.
LAN3 eth4 10/100/1000 MBit RJ45 n.a.
OTG - Storage n.a.

Hardware Specifications

Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions

Do not operate the appliance simultaneously with both 12V DC and Power over Ethernet (PoE) as parallel power sources. Barracuda recommends to disable PoE if 12V DC is connected.

Power Supply is not included in packaging and needs to be ordered separately (BNGFSCAPSUa / BNGIFSCAPSUa)

SC2 model

SC2.0

SC2.1

SC2.2

SC2.3

SC2.4

SC2.5

SC2.6

SC2.7

1x 1GbE WAN (PoE recipient)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

3x 1GbE LAN (switch)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

USB 2.0

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

USB OTG

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

WiFi (AP or client mode)

No

Yes

No

Yes

No

Yes

No

Yes

3G/UMTS

No

No

Yes

Yes

Yes

Yes

Yes

Yes

4G/LTE Europe

No

No

No

No

Yes

Yes

No

No

4G/LTE North America

No

No

No

No

No

No

Yes

Yes

DIN rail mount

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Wall mount

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Metal Case (Magnetic mount)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Support for Modem M30/M40/M41 Yes Yes No No No No No No
Interface
WAN RJ45 Ethernet NICs  1 x 1 GbE WAN (PoE+ recipient)
LAN RJ45 Ethernet NICs  3 x 1 GbE LAN switch
USB 2.0 1
Micro-USB OTG 1
WiFi 2.4GHz -
Supported Cellular Networks
GSM -
UMTS -
Memory  
RAM [GB] 1
Mass Storage  
Type Micro SD
Size [GB] 16
Size, Weight, Dimensions  
Appliance weight [kg/lbs] 0.55/1.21
Carton weight with appliance [kg/lbs] 0.9/0,55
Appliance size: width x depth x height [in] 1.5 x 5.5 x 5.9
Appliance size: width x depth x height [mm]

37 x 140 x 150

Weight carton with appliance [lbs] 1,98
Weight carton with appliance [kg] 0,9
Carton size: width x depth x height [in] 2.6 x 9.1 x 10.8
Carton size: width x depth x height [mm]

65 x 230 x 275

Form factor

Compact, Din rail

Hardware

Cooling Fanless
Environmental
Noise emission [db/A] n.a.
Operating temperature [°C/°F] 0 to +40 / +30 to +105
Storage temperature [°C°F] -20 to +70 / -5 to +160
Operating humidity (non-condensing) 5% to 95%

MTBF (system)

 

MTBF [yrs.]

> 5

Certifications & Compliance
CE emissions Yes
CE electrical safety Yes
FCC Class A Yes
Power & Efficiency
Aux DC in voltage range (2 pin MC420 3.5mm) 12V - 57V
WAN Port PoE+ Voltage range 37V - 54V 
Compatible PoE+ provider (PSE) IEEE 802.3at (Type 2) PD
DO NOT USE 12V DC AND PoE ON WAN PORT AT THE SAME TIME
Power Supply (optional)
Power supply Single, external
Power supply type

External

Power supply input voltage 100 - 240 V, AC
Power supply frequency [Hz] 50 - 60
Power supply output voltage  12V, DC
Wattage / max. power draw [W] 40
Max. power draw [Amps] 3.33
Max. heat dissipation [W] 40
Max. heat dissipation [BTU] 205
Energy efficiency [average] > 83%
Packaging Content
Appliance  Yes
Straight network cable  Yes
USB Type A to MicroUSB cable  Yes
External power supply Optional
Quick start guide Yes
1x Din rail bracket Yes
1x two pin power connector Yes
2x WiFi antenna SC2.1, SC2.3, SC2.5, SC2.7
2x Cellular antenna with 1.5m cable SC2.2, SC2.3, SC2.4, SC2.5, SC2.6, SC2.7

The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda appliance it was delivered with.

Status LEDs

Your appliance is equipped with a variety of LEDs. One of them is the Status LED. The table below shows the different meanings.

Color Status Meaning installation
All LED Off Off

Appliance is powered off or installation has not initialized far enough for LED control when installation is started.

Power LED front side (blue)

Steady Appliance is plugged in an powered on.
VPN LED front side (green) Steady

Appliance has VPN connection to CloudGen Access Controller

WAN LED front side (orange) Steady Appliance has a connection to the Internet.
WWAN (cellular) (yellow) Blinking Appliance has a connection to provider, Only for models with WWAN module

Wi-Fi (AP or Client mode):

Specification SC2.1 / SC2.3 / SC2.5 / SC2.7
Integrated Wi-Fi (IEEE 802.11b/g)
2.4GHz (2412MHz-2462MHz)
Certificates FCC, CE, RED

3G/UMTS

Specification SC2.2 / SC2.3
Frequencies (MHz)
  • GSM 850/900/1800/1900
  • UMTS 850/1900/2100/2100
WCDMA/HSDPA/HSUPA Power Class

GSM/GPRS Power Class

  • Power Class 4 (33 dBm) for GSM/E-GSM bands
  • Power Class 1 (30 dBm) for DCS/PCS bands EDGE Power Class
  • Power Class E2 (27 dBm) for GSM/E-GSM bands
  • Power Class E2 (26 dBm) for DCS/PCS bands

WCDMA/HSDPA/HSUPA Power Class

  • Power Class 3 (24 dBm) for WCDMA/HSDPA/HSUPA mode
Supported Data Transmission HSUPA, HSDPA, 3G, UMTS, EDGE
SIM Interface 3VDC 6 pin
Certificates FCC, CE, RED

4G/LTE

Specification SC2.4 / SC2.5 SC2.6 / SC2.7
Frequencies (MHz)
  • GSM 850/900/1800/1900
  • UMTS 850/900/1900/2100
  • LTE 800/850/900/1800/2100/2600
  • GSM 850/900/1800/1900
  • UMTS 850/900/1700/1900/2100
  • LTE 700/850/1700/1900/2600
WCDMA/HSDPA/HSUPA Power Class

GSM/GPRS (GMSK) Power Class

  • Power Class 4 (33 dBm) for GSM/E-GSM bands
  • Power Class 1 (30 dBm) for DCS/PCS bands EDGE (8-PSK) Power Class
  • Power Class E2 (27 dBm) for GSM/E-GSM bands
  • Power Class E2 (26 dBm) for DCS/PCS bands

WCDMA/HSDPA/HSUPA Power Class

  • Power Class 3 (24 dBm) for UMTS/HSDPA/HSUPA mode

LTE Power Class

  • Power Class 3 (23 dBm) for LTE mode

GSM/GPRS (GMSK) Power Class

  • Power Class 4 (33 dBm) for GSM/E-GSM bands
  • Power Class 1 (30 dBm) for DCS/PCS bands

EDGE (8-PSK) Power Class

  • Power Class E2 (27 dBm) for GSM/E-GSM bands
  • Power Class E2 (26 dBm) for DCS/PCS bands

WCDMA/HSDPA/HSUPA Power Class

  • Power Class 3 (24 dBm) for UMTS/HSDPA/

HSUPA mode LTE Power Class

  • Power Class 3 (23 dBm) for LTE mode
Data Rate

LTE cat.4, HSUPA cat.6, HSDPA cat.14, GPRS class12, EDGE class126

LTE cat.4, HSUPA cat.6, HSDPA cat.24, GPRS class12, EDGE class126

SIM Interface 3VDC 6 pin
Certificates FCC, CE, RED
Last updated on