The Shaping page displays real-time traffic information for all physical interfaces or VPN transports that have been assigned to a virtual tree. You can also view the configuration settings for each interface and reset the statistics for the virtual trees. For more information, see Traffic Shaping. To access the Shaping page, click the FIREWALL tab and select the Shaping icon in the service bar.
Real-time traffic shaping information is organized into the following columns:
- Interface – The physical network interface or VPN transport and virtual interfaces in use.
Dir – The shaping direction:
- IN – Inbound shaping.
- OUT – Outbound shaping.
- Rate-Max – The maximum bandwidth in bits/s available for the virtual interface.
- Rate-Sum (Sessions) – The actual bandwidth in bits that is used by the virtual interface (sum over all priorities).
- Queue Filling Level – The percentage of the queue that is filled. All incoming traffic is first directed to a queue. When the queue is full, a WRED-based prioritization is done for every incoming packet. Depending on traffic shaping priority settings and the actual queue status, the firewall will decide whether (and what kind of) traffic will be dropped. When the queue is less than 100% full, no prioritization is done and all traffic is treated equally.
Cl1/2/3/ND (Total Bytes/Packets/Drops) – These columns display the actual traffic rate for the priority class Cl1 (Class 1), Cl2 (Class 2), CI3 (Class 3), and ND (NoDelay).
- Total Bytes – The number of bytes propagated by the virtual interface.
- Packets – The number of packets propagated by the virtual interface.
- Drops – The number of drops on the virtual interface due to shaping.
Viewing Interface Configurations
To view the configuration settings for a virtual interface, right-click the interface and select Show Interface Configuration. The actual maximum rate and selected values for the size of internal queues are displayed. You can also view this information by double-clicking the virtual interface.
Resetting Interface Statistics
To reset all the virtual tree statistics, right-click the table and select Reset Interface Statistics.