We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

How to Create an AutoVPN Tunnel via the Command Line Interface on CloudGen Firewall Devices 8.0.1 or Higher

  • Last updated on
AutoVPN allows you to establish a VPN connection between two or more CloudGen Firewalls using the command line interface or the REST API. to use AutoVPN via REST API, see How to Create an AutoVPN Tunnel via REST API on CloudGen Firewall Devices 8.0.1 or Higher.

autovpn_tina_tunnel.png

First, initiate a server session on the first firewall that listens to incoming VPN connection requests from the second firewall. Next, connect the second firewall to the first one by authenticating with a token that was previously generated on the first firewall. To connect more than one firewall to the listener, repeat the second step on each firewall you want to connect to the first one.

 First FirewallSecond Firewall
Public IP34.241.43.2552.213.101.46
Private Network172.31.0.0/2010.0.0.0/24

Before You Begin

  • You must have root level access on the command line to both CloudGen Firewalls in order to initiate the configuration of an AutoVPN TINA tunnel.
  • AutoVPN uses TCP port 694 for configuration and UDP port 691 for the TINA tunnel. Ensure that these ports are not used for any other purpose and are both reachable. For more information, see Best Practice - Core System Configuration Files and Ports Overview.
  • AutoVPN listens on the IP address of the VPN service. If there is no VPN service, AutoVPN creates it and uses the default settings for the listening IP. Verify that the ports 691 and 694 are linked to the VPN service.
  • On CloudGen Firewall deployments in the public cloud, Cloud Integration must be configured. For more information, see Cloud Integration.

Step 1. Create a Session on the First Firewall Initiating a Listener

The listener will wait for connection requests from a firewall in the network 52.213.101.0/24.

  1. Log into the first firewall (e.g., 34.241.43.25) as user root.
  2. On the command line, enter the following command to create a listener: autovpn listen <allowed_subnet> e.g. autovpn listen 52.213.101.0/24.
  3. AutoVPN will display an output to inform you that the listener is up and running. It also displays a token generated for authentication of the second firewall and the session ID:
    listen.png
  4. Double-click the password to copy the password to the clipboard.

Step 2. Create a Session on the Second Firewall to Connect to the First Firewall Waiting for Connection Requests

Repeat this step on each CloudGen Firewall you want to connect to the first firewall.

  1. Log into the second firewall (e.g., 52.213.101.46) as user root.
  2. On the command line, enter the following command to connect to the listener on the first firewall:
    autovpn connect 34.241.43.25 <token>
    .
    To enter the token, right-click with your mouse at the cursor position.
  3. AutoVPN will display an output to inform you that the connection has been established successfully:
    connect.png

Step 3. (for public cloud deployments only) Activate Routing Between Local Cloud Networks and the VPN-Site on Both Firewalls

This step is necessary only on CloudGen Firewall deployments in the public cloud. For all other deployments, continue with Step 4.

Activate the access rule CLOUD-NET-2-VPN-SITE. Repeat the following steps for both firewalls:

  1. Go to CONFIGURATION > Configuration Tree > Box > Assigned Services > Firewall > Forwarding Rules.
  2. Click Lock.
  3. Right-click the access rule CLOUD-NET-2-VPN-SITE.
  4. Click Activate Rule in the list.
    autovpn_activate_access_rule_fwfw.png
  5. Click Send Changes and Activate.

Step 4. (for all deployments except public cloud) Activate Routing Between Local Networks and the VPN-Site on Both Firewalls

This step is necessary on all deployments except public cloud deployments.

Activate the access rule BOX-LAN-2-VPN-SITE. Repeat the following steps for both firewalls:

  1. Go to CONFIGURATION > Configuration Tree > Box > Assigned Services > Firewall > Forwarding Rules.
  2. Click Lock.
  3. Right-click the access rule BOX-LAN-2-VPN-SITE.
  4. Click Activate Rule in the list.
    rule_box2vpn.png
  5. Click Send Changes and Activate.

Step 5. Add AutoVPN to the Network Object VPN-Networks

  1. Go to CONFIGURATION > Configuration Tree > Box > Assigned Services > Firewall > Forwarding Rules.
  2. In the left menu, click Networks.
  3. In the list, double-click the network object VPN-Networks for modifying.
  4. Click + to add IP 0.0.0.0/0 with interface vpnr694 to the network object VPN-Networks.
    autovpn_add_vpnr694.png
  5. Click OK.
  6. Click Send Changes and Activate.

Step 6. (optional) Verify the AutoVPN TINA Tunnel is Set Up Correctly on the First Firewall

Log into the first firewall. Verify that the VPN and dynamic routing services have been set up correctly and that the AutoVPN TINA tunnel is up:

  1. On your first firewall, go to CONFIGURATION > Configuration Tree > Box > Assigned Services. Because no VPN service has been set up prior to this configuration, you will now see the new, automatically configured VPN service:
    autovpn_vpn_configured_automatically_vpn_service.png 
  2. Also, you can see the service node created for dynamic routing:
    autovpn_routing_configured_automatically.png
  3. Go to CONFIGURATION > Configuration Tree > Box > Assigned Services > VPN > Site to Site. You will see that the VPN tunnel is up and running.
     autovpn_vpn_tunnel_up.png
  4. Go to CONFIGURATION > Configuration Tree > Box > Network to verify that local cloud networks are propagated via the AutoVPN tunnel using RIP:
    autovpn_rip_on_first_firewall.png

Step 7. (optional) Verify that the AutoVPN TINA Tunnel is Set Up Correctly on the Second Firewall

To verify the state of the AutoVPN TINA tunnel, log into the second firewall and repeat the steps from Step 6 above. For the services, the output will be the same. However, the entries for the network will be different on the second firewall:

 autovpn_rip_on_second_firewall.png

To route traffic through the AutoVPN tunnel, make sure that you enable the Advertise Route setting for the network routes that should be propagated by the BGP router. See How to Configure Direct Attached Routes, How to Configure Gateway Routes and How to Configure an ISP with Dynamic IP Addresses (DHCP).

Further Information

Last updated on