We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

How to Back Up and Restore Secure Connector, Secure Access Controller, and Control Center Configurations

  • Last updated on

The configuration of the Secure Connector and the Secure Access Controller is stored in the archive.par of the Control Center, whereas the box layer configuration of the Control Center itself is stored in the box.par of the Control Center. The back up and restore process of a Secure Access Controller works in the same way as on the CloudGen Firewall.

Contact Barracuda Support to migrate beyond a back up or restoration.

To back up the configuration of your infrastructure:

  1. Create a box.par file on the Control Center to save the box layer configuration of the Control Center.
  2. Create an archive.par file to save the configuration of all managed firewalls, the Secure Controller, and the Secure Connector.

To restore the configuration of your infrastructure:

  1. Import the box layer configuration of your Control Center from the box.par.
  2. Import the Control Center configuration of all your devices in the Control Center with the archive.par.
  3. In the restored Control Center, export the configuration of your Secure Access Controller in a box.par file.
  4. On the Secure Access Controller, import the configuration from the created PAR file.

Back Up Your Infrastructure

Step 1. Back Up Your Control Center Box Layer 
  1. Log into the box layer of the Control Center.
  2. Go to CONFIGURATION > Configuration Tree.
  3. Right-click Box and select Create PAR file. The Save As window opens.
  4. Select the archive type: 
    • PAR File (*.par) (default)
    • Compressed PAR File (*.pgz)
    • Encrypted PAR File (*.pca)
  5. If you selected Encrypted PAR file, the Password window opens.
  6. Click Use Serial Number or enter the Password manually.

The box.par file is saved to your local hard drive.

Step 2. Back Up Your Control Center Configuration 
  1. Log into the Control Center.
  2. Go to CONFIGURATION > Configuration Tree
  3. Right-click the Multi-Range and select Create PAR file.
  4. The Save As window opens.
  5. Select the archive type: 
    • PAR File (*.par) (default)
    • Compressed PAR File (*.pgz)
    • Encrypted PAR File (*.pca)
  6. If you selected Encrypted PAR file, the Password window opens.
  7. Click Use Serial Number or enter the Password manually.

The archive.par file is saved to your local hard drive.

Restore Your Infrastructure

Step 1. On Your Control Center, Import the Box Layer of Your Control Center
  1. Go to CONFIGURATION > Configuration Tree.
  2. Right-click Box and select Restore from PAR file. Select the required PAR / PGZ / PCA file.
  3. If you are using a PCA file encrypted with a manual password, enter the Password and click OK.
  4. Click Activate.
  5. Go to CONTROL > Box
  6. In the left navigation menu, expand Operating System and click Firmware Restart. Click Yes to confirm that you want to restart the subsystem.
  7. Expand Network and click Activate new network configuration.
  8. Select one of the following network configuration activation modes:
    • If you are continuing to use the same management IP address and management port, click Failsafe.
    • If the new management IP address and management port are different from the ones currently configured on the appliance, click Activate now.
      For information, see How to Activate Network Changes.
Step 2. On Your Control Center, Import the Configuration 
  1. Log into the Control Center.
  2. Go to the CONFIGURATION > Configuration Tree page. If you are prompted with warning messages, click no.
  3. Right-click Multi-Range and select Restore from PAR file
  4. Select the required archive.par file.
  5. (Optional) If the license has changed, you must also import the base license of the box layer on the Control Center. For more information, see How to Manually Install the Licenses for the Control Center.

If you are restoring the configuration of a Control Center that has been reinstalled after a system crash, you must also restore the configurations of the appliances that it manages.

Step 3. On Your Control Center, Export the Configuration of Your Secure Access Controller
  1. Log into the Control Center.
  2. Click the CONFIGURATION tab.
  3. In the Configuration Tree, navigate to the range and cluster for the Secure Access Controller.
  4. Expand Boxes, right-click the Secure Access Controller, and select Create PAR file for box.
  5. Select the archive type: 
    • PAR File (*.par) (default)
    • Compressed PAR File (*.pgz)
    • Encrypted PAR File (*.pca)
  6. If you selected Encrypted PAR file, the Password window opens.
  7. If you selected Encrypted PAR file, click Use Serial Number or enter the Password manually.

  8. Save the PAR file to your local hard drive.
Step 4. On Your Secure Access Controller, Import the Configuration of Your Secure Access Controller
  1. Log into the Secure Access Controller.

  2. Go to the CONFIGURATION > Configuration Tree page.

  3. Right-click Box and select Restore from PAR file. Select the PAR or PCA file you previously created for this Secure Access Controller in the Control Center.

  4. If you are using a PCA file encrypted with a manual password, enter the Password and click OK.

  5. (Optional) Click OK to confirm the Emergency Override warning message.

  6. Click Activate.

  7. Go to the CONTROL > Box page.

  8. In the left navigation pane, expand Operating System and click Firmware Restart. Click Yes to confirm that you want to restart the subsystem.

  9. Expand Network and click Activate new network configuration.

  10. Select one of the following network configuration activation modes:

    • If you are continuing to use the same management IP address and management port, click Failsafe.

    • If the new management IP address and management port are different from the ones currently configured on the appliance, click Activate now.

      For information, see How to Activate Network Changes .

Further Information

Last updated on