We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall


  • Last updated on

Barracuda IoT Connect is currently in Private Preview (Early Access). Please contact iot_connect@barracuda.com to request an invitation.


The Template page shows all created templates and their configuration settings. Templates are essential for the management of the Secure Connector devices because they let you configure several devices at one time. Instead of configuring each Secure Connector separately, you can create a template and assign Secure Connector devices to it. All devices will then apply the configuration provided in the template. You can add new templates or download the template list as a CSV file


Create a Template

  1. Click TEMPLATES.
  2. Click ADD.
  3. The Create Template wizard opens.
    1. In the Basic blade:
      1. Template Name - Enter a name for the template.
      2. Root Password - Enter the root password for the Secure Connector devices assigned to this template.
      3. Confirm Root Password - Retype the root password.
      4. Click NEXT.
    2. In the LAN blade:
      1. Select either One NetworkTwo Networks, or Three Networks.
      2. Automatic Configuration - If Automatic mode is disabled, the Secure Connector IP address can be specified along with the DHCP range allocated to LAN clients.
      3. Click NEXT.
    3. In the Wi-Fi blade:
      1. Enabled - Enable to use Wi-Fi if your Secure Connector is Wi-Fi capable.
      2. Mode - Select either Access Point or Client. In Client mode, the Secure Connector connects to existing infrastructure and receives the network settings from a DHCP server. In Access Point mode, the Secure Connector enables client devices to connect to the configured SSID and DHCP server. 
      3. Click NEXT.
    4. In the 3G/4G blade:
      1. Enabled - Enable if you use a Secure Connector with cellular support and an installed SIM card.
      2. Access Point Name - Enter the name of your access point.
      3. Phone Number - Enter the phone number of the installed SIM card
      4. SIM PIN - Enter the PIN of the installed SIM card.
      5. Confirm SIM PIN - Retype your PIN.
      6. Click NEXT.
    5. In the Assign SCs blade:
      1. All Secure Connector devices assigned to your account via Zero Touch Deployment (ZTD) that are compatible with the settings of this template can be selected by selecting the check box next to it. To select all Secure Connector devices, select the check box in the upper-left corner.
      2. Click Add missing Secure Connector by Serial/Linking Code to add Secure Connector devices that are not linked to your ZTD.
        1. Serial - Enter the serial number of your Secure Connector.
        2. Linking Code - Enter the linking code of your Secure Connector.
      3. Click NEXT.
    6. In the Overview blade, review the configuration and click SAVE.
    7. Read the notes in the Success blade carefully and click FINISH.
Last updated on