It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

This Firmware Version Is End-Of-Support

Documentation for this product is no longer updated. Please see End-of-Support for CloudGen Firewall Firmware for further information on our EoS policy.

Routed VPN Settings

  • Last updated on

The following settings apply both to the VPN interface and the next-hop interface. The interface configuration is mainly used for static routing (e.g., when configuring VPN on VRFs, or when changing the vpn0 interface IP address), whereas the next-hop interface must be configured when using routed VPN or dynamic routing protocols (e.g., BGP or OSPF over VPN). After assigning the interface with a local IP address, it may be directly used within the OSPF or BGP router configuration.

SettingDescription
VPN InterfaceThe unique index number for the VPN interface.
MTU

The Maximum Transmission Unit size.

Values may be within the range of 1398 and 4000.

IPs

The IP addresses that will be started on the vpnX interface.

Multiple IP addresses can be entered by delimiting them with a blank character.

MulticastHolds all multicast IP addresses. They can be entered by delimiting them with a blank character.