It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen Firewall

SC3

  • Last updated on
SC3 Top View

SC3_Top.png

SC3 Front View

SC3_front.png

Default Port Configuration

Port LabelOS NotationSpeed/TypeManagement Port
WANeth110/100/1000 MBit RJ45(Management Port)
LAN1eth010/100/1000 MBit RJ45n.a.
LAN2eth310/100/1000 MBit RJ45n.a.
LAN3eth410/100/1000 MBit RJ45n.a.

Hardware Specifications

Warranty and Safety Instructions

Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Networks Appliance Safety Instructions

The Secure Connector hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your appliance. To protect your network, follow the instructions for the standard deployment.

If required, you can reset the configuration on your Secure Connector hardware appliances. For more information, see Secure Connector Troubleshooting.

Do not operate the appliance simultaneously with both 12V DC and Power over Ethernet (PoE) as parallel power sources. Barracuda Networks recommends to disable PoE if 12V DC is connected.

Power Supply is not included in packaging and needs to be ordered separately (BNGFSCAPSUa / BNGIFSCAPSUa)

To prevent damage, connect the DC plug to the appliance before plugging the power adapter into the AC outlet.

SC3 model

SC30

SC31

SC34

SC35

1x 1GbE WAN (PoE recipient)

Yes

Yes

Yes

Yes

3x 1GbE LAN (switch)

Yes

Yes

Yes

Yes

USB 3.0

Yes

Yes

Yes

Yes

USB OTG

Yes

Yes

Yes

Yes

Wi-Fi (AP or client mode)

No

Yes

No

Yes

3G/UMTS

No

No

Yes

Yes

4G/LTE global

No

No

Yes

Yes

DIN rail mount

Yes

Yes

Yes

Yes

Wall mount

Yes

Yes

Yes

Yes

Metal Case (Magnetic mount)

Yes

Yes

Yes

Yes

Support for Modem M40/M41/M42 Yes Yes No No
Interface
WAN RJ45 Ethernet NICs 1 x 1 GbE WAN (PoE+ recipient)
LAN RJ45 Ethernet NICs 3 x 1 GbE LAN switch
USB 3.01
Wi-Fi 2.4GHzYes
Supported Cellular Networks
GSMSC34, SC35
UMTSSC34, SC35
LTESC34, SC35
System 
CPUARM Cortex A7
RAM [GB]2
Mass Storage 
TypeMicro SD

Size on-board [GB]

8
Size micro SD [GB]16
Size, Weight, Dimensions 
Appliance weight [kg/lbs]1.15 / 2.54
Carton weight with appliance [kg/lbs]1.85 / 4.08
Appliance size: width x depth x height [in]3.07 x 5.91 x 4.72
Appliance size: width x depth x height [mm]

78 x 150 x 120

Carton size: width x depth x height [in]

7.48 x 7 x 8.94

Carton size: width x depth x height [mm]

190 x 178 x 227

Form factor

Compact, Din rail

Hardware

CoolingNo fan
Environmental
Noise emission [db/A]n.a.
Operating temperature [°C/°F]-4 to +158 / -20 to +70
Storage temperature [°C°F]-4 to +158 / -20 to +70
Operating humidity (non-condensing)5% to 95%

MTBF (system)

 

MTBF [yrs.]

> 5

Certifications & Compliance
CE emissionsYes
CE electrical safetyYes
FCC Class AYes
Power & Efficiency
Aux DC in voltage range (2 pin MC420 3.5mm)12V - 57V
WAN Port PoE+ Voltage range37V - 54V 
Compatible PoE+ provider (PSE)IEEE 802.3at (Type 2) PD
DO NOT USE 12V DC AND PoE ON WAN PORT AT THE SAME TIME
Power Supply (optional)
Power supplySingle, external
Power supply type

External

Power supply input voltage100 - 240 V, AC
Power supply frequency [Hz]50 - 60
Power supply output voltage 12V, DC
Wattage / max. power draw [W]60
Max. power draw [Amps]2.5
Max. heat dissipation [W]60
Max. heat dissipation [BTU]205
Energy efficiency [average]> 83%
Packaging Content
Appliance Yes
Straight network cable Yes
USB Type A to MicroUSB cable Yes
External power supplyOptional
Quick start guideYes
1x Din rail bracketYes
1x two pin power connectorYes
2x Wi-Fi antennaSC31, SC35
2x Cellular antenna with 1.5m cableSC30, SC34

The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks appliance it was delivered with.

Status LEDs

Your appliance is equipped with a variety of LEDs. The table below shows the different glowing states.

ColorStatusMeaning installation
All LEDs OffOff

Appliance is powered off or installation has not initialized far enough for LED control when installation is started.

Power LED front side (blue)

SteadyAppliance is plugged in an powered on.
VPN LED front side (green)SteadyAppliance has VPN connection to CloudGen Access Controller.
WAN LED front side (orange)SteadyAppliance has a connection to the Internet.
WWAN (cellular) (yellow)BlinkingAppliance has a connection to provider. Only for models with WWAN module.
PSU LEDs - (green)SteadyPSU modules connected, power supply unit is up and running.

Wi-Fi (AP or Client mode)

SpecificationSC31 / SC35
Integrated Wi-Fi (IEEE 802.11b/g/n)
2.4GHz (2412MHz-2462MHz)
CertificatesFCC, CE, RED

4G/LTE

SpecificationSC34 / SC35
Frequencies (MHz)
  • GSM 850/900/1800/1900
  • UMTS 850/900/1900/2100
  • LTE 800/850/900/1800/2100/2600
WCDMA/HSDPA/HSUPA Power Class

GSM/GPRS (GMSK) Power Class

  • Power Class 4 (33 dBm) for GSM/E-GSM bands
  • Power Class 1 (30 dBm) for DCS/PCS bands EDGE (8-PSK) Power Class
  • Power Class E2 (27 dBm) for GSM/E-GSM bands
  • Power Class E2 (26 dBm) for DCS/PCS bands

WCDMA/HSDPA/HSUPA Power Class

  • Power Class 3 (24 dBm) for UMTS/HSDPA/HSUPA mode

LTE Power Class

  • Power Class 3 (23 dBm) for LTE mode
Data Rate

LTE cat.4, HSUPA cat.6, HSDPA cat.14, GPRS class12, EDGE class126

SIM Interface3VDC 6 pin
CertificatesFCC, CE, RED