It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen WAN

T93

  • Last updated on
T93_Front.pngF93.R_Back_noDINRAIL.pngF93.R_Bottom.pngF93.R_Left.pngF93.R_Right.pngF93.R_Top.png
Warranty and Safety Instructions

Opening your Barracuda Networks appliance or removing its warranty label will void your warranty and hardware support.

Barracuda Networks Appliance Safety Instructions

Power supply is not included in packaging and needs to be ordered separately (BNGF93A.PA009/BNGIF93A.PA009).

To prevent damage, connect the DC plug to the appliance before plugging the power adapter into the AC outlet.

Default Port Configuration

Port LabelOS NotationSpeed/TypeNotes
1p110/100/1000 MBit RJ45High Availability
2p2 10/100/1000 MBit RJ45DHCP
3p3 1 GbE Optical Fiber SFP  

The CloudGen WAN hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your appliance. To protect your network, follow the instructions for the standard deployment.

Hardware Specifications

Interface
Model F93.R2 x 1 GbE RJ45
1 x 1 GbE SFP Optical Fiber
USB 3.02
Serial console1x DB9 RS232
Data Storage
RAM [GB]4
Mass Storage
TypeSSD
Size [GB]100
Size, Weight, Dimensions
Appliance weight [lbs] / [kg]2.04 / 1.2
Carton weight with appliance [lbs] / [kg]4.8 / 2.2
Appliance size: width x depth x height [in] / [mm]2.04 x 5.9 x 5.11 / 52 x 150 x 130
Carton size: width x depth x height [in] / [mm]10 x 10 x 12 / 254 x 254 x 305
Form factorCompact, DIN rail mount

Hardware

CoolingNo fan
MTBF [SYSTEM] 
MTBF [yrs.] [g]> 9
Environmental
Noise emission [db/A]n/a
Operating temperature [°F] / [°C]-40 to +167 / -40 to +75
Storage temperature [°F] / [°C]-40 to +185 / -40 to +85
Operating humidity (non-condensing)5% to 90%
Certifications & Compliance
CE emissionsYes
CE electrical safetyYes
FCC emissionsYes
ROHS compliantYes
Power & Efficiency
Power supplySingle
Power supply typeExternal (PA009)
Output power [V] / [A] / [W] 12 / 8 / 96
Operating temperature [°C]0 - 70

External power supply is not included in delivery of the appliance and needs to be ordered individually. For technical specifications, read the FSP096-AHAN3 Datasheet.

Power connectorPhoenix contact
4-pin connector w/ lock
Power type [AC/DC]DC
Input rating [Volts]12 - 36
Wattage / max. power draw [W]60
Max. power draw (@ 24Vdc) [A]2,5
Max. heat dissipation [W]60
IP Code

IP20

The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda appliance it was delivered with.

LEDs and Acoustic Signals

Your appliance is equipped with a variety of LEDs and acoustic signals. The front panel contains one power LED (green), one status LED (greed/red), one disc LED (yellow), and various port LEDs. Two acoustic signals indicate that the appliance is booting up or installation is complete.
The Status LED is labeled either with a heartbeat symbol or the term 'Status'. It indicates the appliance’s operational state by changing colors between green and red and by changing between blinking and steady glowing. The tables below show the different meanings of the different glowing states and acoustic signals.

LED ColorStatusMeaning InstallationMeaning Operation

All LEDs Off

Off

Appliance is powered off or installation has not initialized far enough for LED control when installation is started.

Appliance is powered off.

Power LED front side - BLUE

Steady

-

Appliance is plugged in and is on.
Status LED front side - GREEN/REDOffInstallation has not initialized far enough for LED control when installation is started.-

Status LED front side - GREEN

Steady

After a hotfix installation, the LED turns to green until the next reboot in case the hotfix installation was successful. This feature requires firmware 7.1.3 or higher OR 7.2.2 or higher.

Box is running normally, or installation has finished successfully.
Status LED front side - GREENBlinking slowly (1/s interval)Normal installation.Appliance is either booting, shutting down, or performing a system update.

Status LED front side - RED

Steady

After a hotfix installation, the LED turns to red until the next reboot in case the hotfix installation failed. This feature requires firmware 7.1.3 or higher OR 7.2.2 or higher.

Appliance is halted and may be disconnected, or an error occurred preventing the appliance from entering the up state.

Disc LED - YELLOW

Blinking

Appliance is reading or writing on storage.

Appliance is accessing the internal storage.

Port LEDs - GREEN/YELLOW

Left blinking

Data transfer – Yellow (10/100 Mbps)

Port in use.
Right steady-Port is on.
Port LEDs 3 for Optical Fiber port - GREEN  Steady Port is on.
BlinkingData transfer.Port in use.
Port LEDs 6 and 7 for Optical Fiber ports - GREEN  Steady-Port is on.
BlinkingData transfer.Port in use.
Acoustic SignalFrequencyMeaning
Beep

1 time (1sec.)

The appliance is booting.
Beep/Jingle

3 times (1sec.-1sec.-1sec.)

Installation was completed successfully. The appliance is halted for a reboot. After reboot, one beep will again indicate booting.

LED and acoustic signals may vary between different appliance models.

Serial Console Port

In order to establish a console connection to the appliance using an RS232 serial cable, you need to configure the serial port on the terminal using the following parameters:

ParameterValue
Baud19200
Bits8
Stop bit1
ParityNone
HandshakeNone
Last updated on