It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda CloudGen WAN

T200 Revision C

  • Last updated on

T200C.front.png

T200C.back.png

Warranty and Safety Instructions

Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support.

Barracuda Networks Appliance Safety Instructions

Always use the power supply shipped with the appliance. To prevent damage, connect the DC plug to the appliance before plugging the power adapter into the AC outlet.

Default Port Configuration

Port LabelOS NotationSpeed/TypeManagement Port
1p110/100/1000 MBit RJ45High Availability
2p2 10/100/1000 MBit RJ45 
3p3 10/100/1000 MBit RJ45 
4p4 10/100/1000 MBit RJ45DHCP
5p5 10/100/1000 MBit RJ45 
6p6 10/100/1000 MBit RJ45 
7p7 10/100/1000 MBit RJ45 
8p8 10/100/1000 MBit RJ45 
9p9 10/100/1000 MBit RJ45 
10p10 10/100/1000 MBit RJ45 
11p11 10/100/1000 MBit RJ45 
12p12 10/100/1000 MBit RJ45 
13p131 GbE Optical Fiber SFP 
14p141 GbE Optical Fiber SFP 
15p151 GbE Optical Fiber SFP 
16p161 GbE Optical Fiber SFP 

The CloudGen WAN hardware appliances ship with a Quick Start Guide. Follow this guide to connect to your appliance.

Hardware Specifications

Interface

RJ45 Ethernet NICs

  • 12 x 1 GbE RJ45 Ethernet
  • 4 x 1 GbE SFP
USB 3.02
Serial console1 [RJ45]
Data Storage
RAM [GB]4
Mass Storage
TypeSSD
Size [GB]80 / > 80
Size, Weight, Dimensions
Appliance weight [kg]2.3
Carton weight with appliance [kg]4.6
Appliance size: width x depth x height [mm]300 x 219 x 44
Carton size: width x depth x height [mm]400 x 340 x 185
Form factorCompact

Hardware

CoolingFan
Power supplySingle, external
Environmental
Noise emission [db/A]< 40
Operating temperature [°C]0 to +40
Storage temperature [°C]-20 to +70
Operating humidity (non-condensing)10% to 95%
Certifications & Compliance
CE emissionsYes
CE electrical safetyYes
FCC emissionsYes
ROHS compliantYes
Power & Efficiency
Power supply typeSingle
Power type [AC/DC]AC
Input rating [Volts]90-264
Input frequency [Hz]50-60
Auto sensen.a.
Wattage / max. power draw [W]90
Max. power draw (@ 230V) [A]4
Max. heat dissipation [W]52
Max. heat dissipation [BTU]180
Energy efficiency [average]> 89%

The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time because Barracuda Networks may change hardware components due to technological advancements. Therefore, the list may not reflect the current hardware configuration of the Barracuda appliance it was delivered with.

LEDs and Acoustic Signals

Your appliance is equipped with a variety of LEDs and acoustic signals. The front panel of the Barracuda CloudGen WAN T200 C contains one power LED (blue), one disc LED (green), one status LED (red), and 4 port LEDs. On the back panel, you can see one power button LED and various port LEDs. Two acoustic signals indicate the status of installation. The tables below show the different meanings of the different glowing states and acoustic signals.

LED ColorStatusMeaning InstallationMeaning Operation

All LEDs Off

Off

Appliance is powered off or installation has not initialized far enough for LED control when installation is started.

Appliance is powered off.

Power LED front side - BLUE

Steady

-

Appliance is plugged in and is on.
Status LED front side - REDOffInstallation has finished successfully.Box is running normally.

Status LED front side - RED

Steady

After a hotfix installation, the LED turns to red until the next reboot in case the hotfix installation failed. This feature requires firmware 7.1.3 or higher OR 7.2.2 or higher.

Appliance is halted and may be disconnected, or an error occurred preventing the appliance from entering the up state.
Status LED front side - REDBlinking slowly (1/s interval)Normal installation.Appliance is either booting, shutting down, or performing a system update.

Status LED front side - RED

Blinking fast (4/s interval)

Error during installation.

Appliance is in ART mode.

Disc LED - GREEN

Blinking

Appliance is reading or writing on storage.

Appliance is accessing the internal storage.

Port LEDs - GREEN/YELLOW

Left blinking

Data transfer – Yellow (10/100 Mbps)

Port in use.
Right steady-Port is on.

PSU LEDs - GREEN

Steady

PSU modules connected and running

Power supply unit is up and running.

Off

Power defective, standby, or shutdown

Power supply unit is off or in standby mode.
Acoustic SignalFrequencyMeaning
Beep

1 time

(.)

Appliance is booting.
Beep

3 times

(...)

Installation was completed successfully; appliance is halted for reboot. After reboot, one beep will again indicate booting.
Beep

3 times long

(_ _ _)

Error during installation.

LED and acoustic signals may vary between different appliance models.

Serial Console Port

In order to establish a console connection to the appliance using an RJ45 serial cable, you need to configure the serial port on the terminal using the following parameters:

ParameterValue
Baud19200
Bits8
Stop bit1
ParityNone
HandshakeNone
Last updated on