Use this article to deploy the Barracuda Email Security Service for Exchange Server 2007 and 2010 in your environment.
Step 1. Ensure Connectivity and Redundancy
- Open your firewall ports to allow the IP address ranges based on your Barracuda Email Security Service instance; see Barracuda Email Security Service IP Ranges for a list of ranges based on your Barracuda Email Security Service instance
- Where relevant, verify your network subnet is granted access in the ACL on your mail server (and LDAP server, for that matter)
- Block all port 25 traffic except for that originating from the Barracuda Email Security Service IP address ranges based on your Barracuda Email Security Service instance
Step 2. Launch the Barracuda Email Security Service Setup Wizard
- Log in to Barracuda Email Security Service, and click the link to launch the Email Security Service Setup wizard.
- Click Get Started. The Specify Primary Email Domain page displays. Enter the primary domain you want to filter, for example:
Click Next. The Specify Email Servers page displays. Enter the mail server hostname (FQDN) or IP address for the domain entered in the previous step.
- Click Add. Enter an email address to test the server configuration, and click Test All Mail Servers.
- Once the mail server is verified, the Verified () icon displays in the status column and a confirmation message displays at the top of the page.
- Click Next. The Configure Settings page displays. Select from the following options:
- Virus Protection – Set to On to direct the Barracuda Email Security Service to detect and block viruses on inbound email.
- Spam Protection – Set to On to direct the Barracuda Email Security Service to evaluate inbound mail for spam based on a score assigned to each processed message. When set to Off inbound mail is not scanned for spam.
Spam Scoring – Set Spam Protection to On to enable Spam Scoring. Scoring ranges from 1 (definitely not spam) to 10 (definitely spam). Setting a score of '1' will likely block legitimate messages while setting a score of '10' will allow more messages through the system. Based on this score the Barracuda Email Security Service blocks messages that appear to be spam and logs these messages in the user's Message Log with Score as the reason for the block.
Click Next. The Outbound page displays.
To verify your domain, replace your current MX records with the Barracuda Email Security Service Primary and Backup MX records displayed on the page.
If you only want to route your inbound mail through the Barracuda Email Security Service and not your outbound mail, select I do not want to route my e-mail through Barracuda at this time, and select the verification option:
CNAME Records – To use the CNAME records method to verify the domain ownership:
Log in to your DNS Server and, under this domain, create a subdomain whose name is created by concatenating 'barracuda' and the CNAME token shown in the Route Email Through Barracuda page. For example:
Point the CNAME record of that subdomain to ess.barracuda.com
Click Confirm Validation in the Route Email Through Barracuda page.
Email to Technical Contact – This method sends a verification email to the technical contact email address, if it exists, listed on your domain's WHOIS entry.
Email to the postmaster – This method sends a verification email to the postmaster email address for your domain. The confirmation email includes a link that the recipient must click to verify the domain.
- CNAME Records – To use the CNAME records method to verify the domain ownership:
Click Next, and click Next once again.
On the Select Data Center Region page, select the data center for your locale, and click Get Started.
Complete the wizard pages.
The Confirmation page displays. Confirm domain ownership, and then click Done.
Go to the Domains page and verify your settings.
Step 3. Set Up User Accounts
You can add users manually, or use your organization's LDAP server or Azure AD service to automatically synchronize the Barracuda Email Security Service with your active directory server. To create a few test accounts during the evaluation period, use the Manually Add Users steps below.
Decide how you want to use quarantine:
- Global quarantine – When selected, the administrator monitors the Message Log for quarantined mail and decides whether or not it is spam.
Per-user quarantine – When selected, users have quarantine accounts and can decide whether or not mail is spam. Set up several users for the evaluation and test the results. This option requires more initial effort to set up user accounts, possibly with sync to your active directory server, but less work for the administrator over time since users manage their quarantined mail.Quarantine TypeCreate User AccountsManages Quarantine?User can Create Sender Whitelist/Blocklist
Global No Admin No Per-user Yes User Yes
- If you select Global quarantine, there is no need to create user accounts.
- If you select Per-user quarantine, manually add a few test accounts on the Users > Add/Update Users page, and set Enable User Quarantine to Yes. The first time the Barracuda Email Security Service receives an email for that user and the message is quarantined, the user receives a quarantine notification email at the scheduled quarantine notification interval. Depending on how you configure the quarantine notification interval on the Users > Quarantine Notification page, the user receives a quarantine digest at a specified time.
Manually Add Users
- Go to Users > Add/Update Users:
- In the User Accounts field, enter each user email address for the domain on a separate line, and then select from the following options:
Enable User Quarantine – All emails for the user which meet the configured block policy go to the user's quarantine account.
Notify New Users – When set to Yes, users receive a welcome email when the account is created.
Click Save Changes. The users are added to the Users > Users List table where you can select from the following actions:
Edit – Click to specify domains this user can manage.
Reset – Click to send the user an email with instructions on how to reset their account password.
Log in as this user – Click to view or change the user's settings (for example, quarantine notifications), v iew/manage the domains this user manages, and v iew/search/manage the user's Message Log.
Delete – Click to remove the user account.
Click Save Changes; the Users List displays.
Automatically Add Users
You can configure user authentication via your organization's LDAP server or Azure AD service. For complete setup details, see the following articles:
Step 4. Configure Outbound Mail Scanning
- Log in to the Barracuda Email Security Service, and go to Outbound Settings > Sender IP Address Ranges.
- Enter the IP Address and Domain Name (logging domain) and optional Comment for IP address ranges allowed to send outgoing email from your domains, and click Add. Note that each mail server must contain a reverse DNS PTR record.
Add all IP addresses from which outgoing mail is allowed to flow through the Barracuda Email Security Service. The Logging Domain is the domain name that appears in the Message Log as the sending domain for the associated IP address.
Step 5. Set Up Barracuda Email Security Service Outbound Scanning
Complete the following steps for each domain from which you are relaying outbound mail:
- Log in to the Barracuda Email Security Service, click Domains, and click on the domain name to toggle the MX records configuration; make note of the Outbound Hostname.
- Open the Exchange Management Console.
- Under Organization Configuration, select Hub Transport, and then click the Send Connectors tab:
- In the Name field, type:
Barracuda Email Security Service Outbound Connector
- Click Next. The Address Space page displays:
- Click Add. The SMTP Address space dialog box displays. In the Address field, type an asterisk:
- Click OK, and click Next in the Address space page.
The Network settings page displays. Select Route mail through the following smart hosts:
- Click Add. Enter the Outbound Hostname from Step 1 above, and click OK.
- Click Next in the Network settings page. The Source Server page displays. If your Exchange servers are not listed, click Add.
- In the Select Hub Transport dialog box, select all servers that have Hub Transport roles installed, and click OK.
- Click Next in the Source Server page. The New Connector displays. Review your settings:
- Click New, and then click OK to save your connector and route outbound mail through Barracuda Email Security Service.
Step 6. Verify Mail is Flowing
- Log in to the Barracuda Email Security Service.
In the Dashboard page verify inbound and outbound messages are being logged for the selected domain.
Step 7. Configure Sender Policy Framework for Outbound Mail
To assure Barracuda Networks is the authorized sending mail service of outbound mail from your Barracuda Email Security Service, add the following to the Sender Policy Framework (SPF) record INCLUDE line of the SPF record for your sending mail server for each domain sending outbound mail. Select the relevant SPF INCLUDE based on the region you selected for your Barracuda Email Security Service. See Sender Authentication for more information.
- If you have an SPF record set up for your domain, edit the existing record, and add the following to the INCLUDE line for each domain sending outbound mail based on your Barracuda Email Security Service instance. For example:
- If you do not have an SPF record set up for your domain, use the following value to create a TXT record that creates a HARDFail SPF for your domain based on your Barracuda Email Security Service instance. For example:
v=spf1 include:spf.ess.barracudanetworks.com -all
See Sender Policy Framework for Outbound Mail for INCLUDE values based on your Barracuda Email Security Service instance.
Step 8. Enable Advanced Threat Protection
Files blocked by ATP display on the Dashboard.
- Go to ATP Settings, and select the desired option:
- Deliver First, then Scan – Attachments are delivered with the message to the recipient and then scanned by the ATP service; if a virus is detected, an email notification is sent to the email recipient. Additionally, if Notify Admin is set to Yes, and a virus is detected in the scanned attachment, an email is sent to the administrator.
- Scan First, then Deliver – Attachments are scanned by the ATP service before delivery. If a virus is detected in the attachment the message is blocked, otherwise it is delivered to the recipient.
Select whether to Notify Admin if a virus is detected in a scanned attachment. When set to Yes, enter the ATP Notification Email address in the associated field.