It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda Link Balancer
Overview Documentation Materials

Back to Knowledgebase

How is my LAN IP used in the Link Balancer with the built in firewall enabled vs. disabled?

  • Type: Knowledgebase
  • Date changed: 2 years ago
Solution #00004108

Scope:
All Barracuda Link Balancer models, firmware version 1.1 and above

Answer:
Use the LAN IP Configuration section on the Basic > IP configuration page to view or change the LAN IP address for the Barracuda Link Balancer.

If the Barracuda Link Balancer firewall is disabled:
  • The LAN IP address is used only for management.
  • The LAN IP address must be on a different subnet than the LAN IP addresses already on your network. Otherwise, your firewall will not pass any request to that address to its outside interface.
If the Barracuda Link Balancer firewall is enabled:
  • The LAN IP address is the default gateway for your network.

Additional Notes:
For more information about initial configuration and deployment options, see the Barracuda Link Balancer Administrator's Guide

Link to This Page:
https://campus.barracuda.com/solution/50160000000HjywAAC