After you have determined your network configuration and installed your Barracuda Load Balancer ADC, you can start configuring your services.
Create a service by assigning a virtual IP (VIP) address and port to it, and adding one or more real servers to handle traffic that arrives at the VIP address. You can also configure load balancing to specify how traffic is distributed to the real servers.
Step 1. Create the Service
To add a service:
- Go to the BASIC > Services page.
- Click Add Service.
- In the Add Service window, specify values for the settings in the Service Configuration section. Enter a name and group, select the service type, enter the VIP address and port, and select an interface for the service.
- For Instant SSL services, also enter a port to receive HTTP traffic.
- For HTTP and HTTPS services, you can also configure caching, compression, access logs, application security, a security policy, and the web firewall log level.
- In the Load Balancing section, select the algorithm for distributing traffic to the real servers for the service. To dynamically distribute traffic based on server loads, you can use adaptive scheduling. For some service types, you can also select a persistence and failover method.
- Depending on your service type and requirements, you can also configure the following sections:
- FTP Passive Configuration – (Only for FTP and FTP SSL services) Settings for passive FTP.
- SSL Settings – (For secure service types) Encryption between the client and the service.
- Certificates – (For secure service types) The certificate that is presented by the service when authenticating itself to a browser or some other client.
- Server Monitor – Health checks for the real servers. For more information on the testing methods for health checks, see Understanding Testing Methods for Services and Real Servers.
- Notifications – Alerts to notify you if the minimum number of operating real servers for this service is not available.
- Other – (List of settings in this section varies for each service type) Additional settings such as the HTTP header name to use in logs, whether to consider letter case in URLs when processing rules, keepalive probes, and a limit on keepalive requests.
- FTP Passive Configuration – (Only for FTP and FTP SSL services) Settings for passive FTP.
- After you finish configuring the service, click Create. The service appears in the left pane of the page.
Step 2. Add Real Servers for the Service
To add a real server for the service:
- In the Configured Servers section above the service settings, click Add Server.
- In the Add Server window, specify values for the settings in the Server Configuration section. Enter a name, IP address, and port for the server.
- For Layer 4 services, you can enable Direct Server Return.
- For Layer 7 services, except Layer 7 - RDP, you can configure advanced options such as client impersonation and connection pooling.
- In the Server Monitor section, configure health checks for the real servers. For more information on the testing methods for health checks, see Understanding Testing Methods for Services and Real Servers.
- Depending on your service type and requirements, you can also configure the following sections:
- SSL Settings – (For secure service types) Encryption between the service and server.
- Certificates – (For secure service types) The certificate that is presented by the server when the service requires client authentication.
- After you finish configuring the server, click Create. The server appears in the Configured Servers table above the service settings.