It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Managed Workplace

Adding a Barracuda Managed Workplace Power Plan

  • Last updated on

When you add a power plan, you perform these steps:

  1. Name the power plan and set the options. See To name a power plan and set the options.
  2. Apply a power plan to a group or device. Do one of the following:

For information about power plan precedence, see Setting and Overriding Power Plan Precedence.

To name a power plan and set the options
  1. In Service Center, click Configuration > Power Management.
  2. Click Create.
  3. In the Power Plan Name box, type a name.
  4. In the Description box, type a description.
  5. Set the power plan options. See Power Plan Settings and Options for details about the options.
To apply a power plan to a group
  1. Under Applied Groups, click Add.
  2. Filter the results by selecting Site Groups or Service Groups.
  3. Select the check boxes for the groups to which you want to apply the power plan.
  4. Click Add.
  5. Repeat steps 1 to 4 until all the groups to which you want to apply the power plan are included.
  6. Click Save.
To apply a power plan to a device
  1. Under Applied Devices, click Add.
  2. Filter the results by selecting the appropriate items and click Filter.
  3. Select the check boxes for the devices to which you want to apply the power plan.
  4. Click Add.
  5. Repeat steps 1 to 4 until all the devices to which you want to apply the power plan are included.
  6. Click Save.

    If a power plan had already been applied to a device, it is replaced with the power plan you just applied.

Last updated on