It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Managed Workplace

Setting the Host Name for an Intel® vPro™ Device

  • Last updated on

You can specify the computer host name for a selected Intel® AMT device.

This is only supported for version 4.0 and later.

For Intel® AMT versions prior to 4.0, if Dynamic Host Configuration Protocol (DHCP) is going to be used to assign the TCP/IP address, then the host name for the Intel® AMT client must be the same as the host name in the operating system.

  1. In Service Center, click Configuration > Intel® vPro™.
  2. Click the Site or Service Group button and corresponding list entries to show the Site, Site Group or Service Group that has the device.
  3. In the list of Intel® AMT devices, select the check box of the device for which you want to set the host name.
  4. Click Set Host Name.
  5. In the Host Name box, type the host name for the Intel® AMT client and ensure it is the same name as the computer name that is defined in the operating system.
  6. Click Save.
Last updated on