It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Managed Workplace

Applying the Infrascale monitoring policies

  • Last updated on

To begin monitoring with the Infrascale service module, you must do one of the following:

  • Add the monitoring policies to a service.
  • Manually apply it to a site, group, or device.
Removing an existing ShadowProtect policy from a device uninstalls the ShadowProtect client.
To apply a monitoring policy to a service
  1. In Service Center, click Configuration > Service Modules.
  2. Click the Infrascale link.
  3. To select a service to associate with the monitoring policies in the Infrascale service module, do the following:
    • In the Service Membership area, click Add.
    • Select the checkbox beside the name of the service you want to associate with Infrascale.
    • Click Add.
After adding the service, you can click the service name to view and modify the sites, groups, and devices within its scope.
After the ShadowCraft StorageCraft policy is applied to a device, you must reboot that device for the policy to take effect. To reboot a device, from the Site dashboard, scroll down to the Protected Devices table, and, in the Action column, click the Reboot link.
To apply a monitoring policy to a group or device manually
  1. In Service Center, click Configuration > Service Modules.
  2. Click the Infrascale link.
  3. To select a service to associate with the monitoring policies in the Infrascale service module, do the following:
  4. In the Service Membership area, click Add.
  5. Select the checkbox beside the name of the service you want to associate with Infrascale.
  6. Click Add.

    After adding the service, you can click the service name to view and modify the sites, groups, and devices within its scope.

  7. Do one of the following:
    • To apply the monitoring policy to a group, in the Policies area, click a monitoring policy name. Click the Manual Application tab, and then under Applied Groups, click Add. Filter on the Group Type, if desired. Select the group and click Add.
    • To apply the monitoring policy to a device, click a monitoring policy name. Click the Manual Application tab, then under Applied Devices, click Add. Filter the list of devices. Select the device and click Add.
After the ShadowProtect StorageCraft policy is applied to a device, you must reboot that device for the policy to take effect. To reboot a device, from the Site dashboard, scroll down to the Protected Devices table, and, in the Action column, click the Reboot link.
Last updated on