It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Managed Workplace

Using Onsite Manager Utilities

  • Last updated on

The Onsite Manager Utilities enable you to manage remote computers without affecting the logged in user.

  • Onsite Manager Utilities do not work with Device Manager.
  • If a WMI-enabled device has a credential management override, then Onsite Manager Utilities will not have access to the device, resulting in greyed-out functionality. If this occurs, you can verify that a credential override has been applied to the device in the Credentials tab in Site Management. See Managing Site Credentials.

For example, you can run network diagnostic tests without affecting the user that is logged into the remote computer, such as:

  • Ping Device and Trace Route to Device
  • Perform remote management and troubleshooting tasks using Registry Editor or computer management
  • Take control of the remote computer using the Command Prompt.

File Explorer Allows you to view, delete, or modify files on any remote Windows computer.

Event Viewer Allows you to view and manage the Windows Event Log for the remote computer.

Windows Services Allows you to view, stop, restart, or edit the properties of any services installed on the remote computer.

Task Manager Allows you to view running processes and user sessions on the remote computer and investigate process session ID information via a built in Google search.

Registry Editor Allows you to view, delete, or modify the registry of any remote Windows computer.

System Information Allows you to quickly obtain the system information from any Windows computer, including uptime statistics, boot information, page file statistics, for example.

IP Config/all Displays the current network configuration for every interface on a Windows computer.

Trace Route to Device Performs a trace route from Onsite Manager to any remote device to help troubleshoot networking problems.

Ping Device Performs a ping from Onsite Manager to any remote device.

Telnet Uses the default Windows Telnet client to connect to devices supporting this protocol.

Remote Shell Launches a remote DOS session on any Windows computer.

Reboot Instructs a Windows computer to reboot.

Shutdown Instructs a Windows computer to power down.

To help you troubleshoot multiple devices, you can launch one utility or more utilities for any device, and you can connect to multiple devices at one time.

The existing Windows Service Account used for monitoring is leveraged to enable remote access to the utilities that apply only to Windows, such as Remote DOS, System Information, and Registry Editor. So, the Service Account must have full Administrator access to the Domain, including remote log in, with no restrictions.

To establish a remote session to use the Onsite Manager Utilities

  1. In Service Center, click Status > Devices.
  2. Click the Site or Service Group button and corresponding selection list entries to show the site or group that has the device with which you want to establish a remote session.
  3. Click the Device Name.
  4. Click Remote Control on the right sidebar.
    If an Internet Explorer dialog box appears, warning you that the page is accessing information that is not under its control, click Yes.
  5. In the Remote Services section, from the Service list, select Onsite Manager Utilities.
  6. In the Onsite Manager Utilities Configuration section, confirm the Remote Machine IP address is correct.
  7. Click Connect.
  8. Type the password.
  9. Click OK.
  10. In the main menu on the left side of the window, click a tool name.
  11. When you are done using the Onsite Manager Utilities, click Close to close the window.











       
Last updated on