We use cookies on our website to ensure we provide you with the best experience on our website. By using our website, you agree to the use of cookies for analytics and personalized content.This website uses cookies. More Information
It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Reporting Server

Deployment

  • Last updated on

For maximum security:

  • Place the Barracuda Reporting Server behind your corporate firewall.
  • Create access restrictions for your management interface.
  • Change the default admin password once you have completed setting up the Barracuda Reporting Server.

To deploy a Barracuda Reporting Server appliance, connect it to one or more devices. Currently, the Barracuda Reporting Server can connect to Barracuda Web Security Gateways. You can connect one, many, or a cluster of Barracuda Web Security Gateways to a single Barracuda Reporting Server. You can then use the Barracuda Reporting Server to report on one or more of the connected devices.

Verify the following for each Web Security Gateway attempting to connect to the Barracuda Reporting Server:

  • Firmware version 11.0 or higher is installed
  • Can ping the Barracuda Reporting Server
  • Can be pinged by the Barracuda Reporting Server

 

In general, traffic does not flow through the Barracuda Reporting Server. However, the Barracuda Reporting Server can send report information to an external server. The only appliance type that should be in line after a Barracuda Reporting Server is an FTP or SMP server that receives report information.

 

For basic deployment, the Barracuda Reporting Server appliance and the appliances it is connected to are assumed to be on the same side of your organization's firewall. If, in your deployment, they are on different sides of the firewall, please open the following ports in the firewall to ensure proper connection between the Barracuda Reporting Server appliance and other appliances:

  • 8000 – default user interface port*
  • 8001 – default data port
  • 2400 – default check port

*Note: If you changed the default user interface port when configuring your Barracuda Reporting Server, be sure to make the appropriate settings on your firewall.

 

 

Last updated on