The following is the list of system log messages, which includes the following:
-  Log Category - The Severity Level of the log.
- LOG_EMERG - System is in an unusable state (Highest priority).
 - LOG_ALERT - Response must be taken immediately.
 - LOG_CRIT - Critical conditions (System in critical condition).
 - LOG_ERROR - Error conditions (An error processing the request).
 - LOG_WARN - Warning conditions (An action is required to be taken on a particular module configuration or process. If no action is taken, an error might occur. Example: “Encryption Key is going to expire within 5 days”).
 - LOG_NOTICE - Normal but significant condition (An unusual activity is noticed, no immediate action is required).
 - LOG_INFO - Informational messages (on ACL configuration changes)
 - LOG_DEBUG - Debug level messages (Lowest priority).
 
 - Log ID - The Event ID of the log.
 - Log Message - Description about the log.
 
| Log Category | Log ID | Log Message | 
|---|---|---|
| 8 | Unknown Error | |
| 110 | Network Unreachable | |
| 111 | Connection Refused | |
| Data Path Monitoring (STM) | ||
| 1001 | System Out of Memory | |
| 1002 | System WAC Version | |
| LOG_NOTICE | 1003 | Mem Start: SCB <start-address>, Low <start-address>, High <start-address> | 
| 1004-8 | System Process Related | |
| 1009 | System Upgrade related | |
| 1010 | Date Setting related | |
| 1011 | Time Zone related | |
| 1012 | System Shutdown | |
| LOG_CRIT | 1013 | System startup failed at initializing: <stage>. Switching to maintenance mode | 
| LOG_CRIT | 1014 | Shutting down all services | 
| LOG_NOTICE | 1014 | Shutting down services completed | 
| LOG_NOTICE | 1015 | Restarting services | 
| LOG_NOTICE | 1015 | Restarting services completed | 
| 1016 | Core Dump | |
| 1017 | Process Start | |
| 1018 | Booting related | |
| LOG_NOTICE | 1019 - 1028 | Activate: Default boot image set to <Image Name> System Related  | 
| LOG_EMERG | 1105 | <Process> is not present | 
| LOG_NOTICE | 1111 | Process mon /proc error ret =<retcode> comm=<commandid> pid=<process-id> | 
| LOG_ALERT | 1119 | (System is getting real hot) or (Possible overheating at device <device-name> temp reading=<temp in 'C>) | 
| LOG_ALERT | 1125 | SBC PII temp overshoot. | 
| LOG_ALERT | 1126 | System highest temp has reached = <External temp 'C> <Internal Temp in 'C> | 
| LOG_ALERT | 1128 | In Fan Group <Group ID> Fan <Fan ID> is Running at <Current Value> rps which is less than expected <default value> | 
| LOG_NOTICE | 1130 | HW: Changing FAN speed <Old Value> -> <New Value> TempReadings (<Max internal 'C> <Max External temp in 'C>]) | 
| LOG_NOTICE | 1203 | SBC FAN <fan-name> detected rpm = <rpm value> | 
System RPCs | ||
| 2001-12 | System RPCs Related | |
| Threshold Controlled (THRSHLD) | ||
| LOG_ALERT | 50001 | Threshold Level crossed. | 
| LOG_ALERT | 50002 | Threshold Level crossed on a service. | 
| LOG_ALERT | 50003 | System critical temp has reached. | 
| LOG_ALERT | 50004 | System highest temp has reached. | 
| LOG_ALERT | 50005 | One of the CPU/System fans is dead. | 
| LOG_ALERT | 50007 | Firmware storage exceeds 85%. | 
| LOG_ALERT | 50008 | Mail storage exceeds 85%. | 
| LOG_ALERT | 50009 | Log storage exceeds 85%. | 
| LOG_ALERT | 50010 | One of the RAID arrays is degrading. | 
| SERVICE | ||
| LOG_NOTICE | 14001 | New Service (ID 0x<vip-context>) Created at <IP Address>:<Port> | 
| LOG_ERROR | 14001 | Failed to Create Service at <IP Address>:<Port> | 
| LOG_NOTICE | 14002 | Service Started <IP Address>:<Port> | 
| LOG_ERROR | 14003 | Failed to Delete Service (ID 0x%08x) at <IP Address>:<Port> | 
| LOG_ERROR | 14004 | Failed to Create Rule at <IP Address>:<Port> | 
| LOG_NOTICE | 14004 | New Rule (ID 0x<rule-context>) Created at <IP Address>:<Port> for ID 0x<vip-context> | 
| LOG_NOTICE | 14005 | Commited: URL [<URL Key>] Header [<Header Key>] | 
| LOG_ERROR | 14006 | Deleted Rule (ID <vapp-context> at <IP:Port> URL [<URL Key>] Header [<Header Key>] | 
| LOG_ERROR | 14007 | Failed to Create Service at <IP Address>:<Port> | 
| LOG_NOTICE | 14007 | New Vapp (ID 0x<vapp-context>) Created at <IP Address>:<Port> for ID 0x<vip-context> | 
| LOG_NOTICE | 14008 | Failed to commit Application: Domain [<Application Rule Domain>] URL [<Application Rule URL>] | 
| LOG_ERROR | 14009 | Failed to Delete Vapp (ID 0x<vapp-context>) at <IP Address>:<Port> Domain [<Application Rule Domain>] URL [<Application Rule URL>] | 
| Config Agent (CONFIG) | ||
| LOG_ERROR | 12001 | Local GATEWAY_NAME not found | 
| LOG_ERROR | 12001 | Digest failed | 
| LOG_ERROR | 12001 | No Monitoring Dispatcher found | 
| LOG_ERROR | 12001 | To execute this operation, peer node should be non-operational | 
| LOG_ERROR | 12001 | Configuring Secure Traffic Manager Succeeded | 
| LOG_ERROR | 12001 | Failed to resolve type of clear stats | 
| LOG_ERROR | 12002 | Duplicate parameter | 
| LOG_ERROR | 12002 | Target doesn't exist | 
| LOG_ERROR | 12002 | Deleting RuleBackup | 
| LOG_ERROR | 12002 | RuleBackup delete succeeded | 
| LOG_ERROR | 12002 | Deleting ServerBackup | 
| LOG_ERROR | 12002 | ServerBackup delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete ServerBackup | 
| LOG_ERROR | 12002 | Deleting Server | 
| LOG_ERROR | 12002 | Server delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete Server | 
| LOG_ERROR | 12002 | Deleting application key | 
| LOG_ERROR | 12002 | Application key delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete application key | 
| LOG_ERROR | 12002 | Deleting QOS class | 
| LOG_ERROR | 12002 | QOS class delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete QOS class | 
| LOG_ERROR | 12002 | Deleting Service | 
| LOG_ERROR | 12002 | Service delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete Service | 
| LOG_ERROR | 12002 | Deleting ACL | 
| LOG_ERROR | 12002 | ACL delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete ACL | 
| LOG_ERROR | 12002 | Deleting NAT entry | 
| LOG_ERROR | 12002 | NAT entry delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete NAT entry | 
| LOG_ERROR | 12002 | Deleting ARP entry | 
| LOG_ERROR | 12002 | ARP entry delete succeeded | 
| LOG_ERROR | 12002 | Duplicate route | 
| LOG_ERROR | 12002 | Deleting route | 
| LOG_ERROR | 12002 | Route delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete route | 
| LOG_ERROR | 12002 | Deleting Interface | 
| LOG_ERROR | 12002 | Interface delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete Interface | 
| LOG_ERROR | 12002 | Deleting VirtualHost | 
| LOG_ERROR | 12002 | VirtualHost delete succeeded | 
| LOG_ERROR | 12002 | Unable to delete VirtualHost | 
| LOG_ERROR | 12002 | Adding VirtualHost | 
| LOG_ERROR | 12002 | VirtualHost add succeeded | 
| LOG_ERROR | 12002 | Unable to add VirtualHost | 
| LOG_ERROR | 12002 | Adding Interface | 
| LOG_ERROR | 12002 | Interface add succeeded | 
| LOG_ERROR | 12002 | Unable to add Interface | 
| LOG_ERROR | 12002 | Interface modify succeeded | 
| LOG_ERROR | 12002 | Unable to modify Interface | 
| LOG_ERROR | 12002 | Adding ARP entry | 
| LOG_ERROR | 12002 | ARP entry add succeeded | 
| LOG_ERROR | 12002 | Unable to add ARP entry | 
| LOG_ERROR | 12002 | ARP entry modify succeeded | 
| LOG_ERROR | 12002 | Unable to modify ARP entry | 
| LOG_ERROR | 12002 | Adding Route | 
| LOG_ERROR | 12002 | Route add succeeded | 
| LOG_ERROR | 12002 | Unable to add Route | 
| LOG_ERROR | 12002 | Gateway is not directly reachable on any interface | 
| LOG_CRIT | 12003 | Failed to retrieve initial groups | 
| LOG_ERROR | 12004 | Can't store rule ID | 
| LOG_ERROR | 12005 | Can't get " NEXTSAPID ": missing " SAPID " or error retrieving " SAPID | 
| LOG_ERROR | 12007 | $NC_INSTALL_ROOT not set | 
| LOG_ERROR | 12007 | Target doesn't exist | 
| LOG_ERROR | 12007 | Failed to create server | 
| LOG_ERROR | 12007 | SetServerConnAttr failed | 
| LOG_ERROR | 12007 | SetServerRedirectAttr failed | 
| LOG_ERROR | 12007 | SetServerOutOfBandMonitorAttr failed | 
| LOG_ERROR | 12007 | SetServerMonitorAttr failed | 
| LOG_ERROR | 12007 | SetServerLBAttr failed | 
| LOG_ERROR | 12007 | StartServer failed | 
| LOG_ERROR | 12007 | SetServerSSLServicePolicy failed | 
| LOG_ERROR | 12007 | SetServerSSLServiceOn failed | 
| LOG_ERROR | 12007 | SetServerSSLServiceOff failed | 
| LOG_ERROR | 12007 | ActiveServerOutOfBandMonitorAttr failed | 
| LOG_ERROR | 12007 | Failed to delete server | 
| LOG_ERROR | 12007 | Failed to reset Server IP, Port or VLAN | 
| LOG_ERROR | 12007 | Failed to look up server | 
| LOG_ERROR | 12007 | SetServerTcpMonitorAttr failed | 
| LOG_ERROR | 12007 | EnableServer failed | 
| LOG_ERROR | 12007 | DisableServer failed | 
| LOG_ERROR | 12007 | ActiveServerOutOfBandMonitorAttr failed | 
| LOG_ERROR | 12008 | Duplicate server | 
| LOG_ERROR | 12008 | Attaching server | 
| LOG_ERROR | 12008 | Attaching server succeeded | 
| LOG_ERROR | 12008 | Failed to look up back-end server | 
| LOG_ERROR | 12008 | Detaching server | 
| LOG_ERROR | 12008 | Detaching server succeeded | 
| LOG_ERROR | 12009 | OUT OF MEMORY !!! Asserting… | 
| LOG_ERROR | 12009 | Error in reading ReadXmlFileIntoString | 
| LOG_ERROR | 12009 | sapIndex.AddFromXMLStr (..., SAP::nsap) failed | 
| LOG_ERROR | 12009 | Could not find mgmt container | 
| LOG_ERROR | 12009 | Could not find ports/ethernet container | 
| LOG_ERROR | 12009 | Could not find hardware container | 
| LOG_ERROR | 12009 | Could not find box container | 
| LOG_ERROR | 12009 | Could not find linux interface | 
| LOG_ERROR | 12009 | Could get local box path | 
| LOG_ERROR | 12009 | AddSAP for box2SAP failed | 
| LOG_ERROR | 12009 | RecurAddChldOfAggSAP for box2 failed | 
| LOG_ERROR | 12009 | SetBoxParametersFromOrgTree failed (box2) ! | 
| LOG_ERROR | 12009 | SetBoxName failed (box2) ! | 
| LOG_ERROR | 12009 | SetBoxParametersFromOrgTree failed ! | 
| LOG_ERROR | 12009 | In SetBoxParametersFromOrgTree. Invalid path specified | 
| LOG_ERROR | 12009 | Could not find Linux interface | 
| LOG_ERROR | 12009 | There should have been 3 physical interfaces. | 
| LOG_ERROR | 12009 | SetParameterValuesUnderPath failed ! | 
| LOG_ERROR | 12009 | in SetBoxParametersFromOrgTree. UpdateDefaultRoute failed ! | 
| LOG_ERROR | 12009 | In GetClearConfTree. SetInitValuesForCC failed ! | 
| LOG_ERROR | 12009 | In UpdateDefaultRoute. Should have matched only one route ! | 
| LOG_ERROR | 12009 | In UpdateDefaultRoute. tmpIdx.GetAggSAP failed ! | 
| LOG_ERROR | 12009 | In UpdateDefaultRoute. sapIndex.GetParamSAP failed ! | 
| LOG_ERROR | 12009 | In UpdateDefaultRoute. tmpIdx.GetParamSAP failed ! | 
| LOG_ERROR | 12009 | In UpdateDefaultRoute. tmpIdx.ModifySAP failed ! | 
| LOG_ERROR | 12009 | In GetMD5HashForFile. CheckIfValidFileToRetrieve failed | 
| LOG_ERROR | 12009 | GetPathForUser failed ! | 
| LOG_ERROR | 12009 | in PutSAPTree. GetHomeDirForUser failed ! | 
| LOG_ERROR | 12009 | In PutSAPTree. Invalid path specified ! | 
| LOG_ERROR | 12009 | In PutSAPTree. Path not found in tmp sapIndex | 
| LOG_ERROR | 12009 | Error. AddFromXMLStr failed ! | 
| LOG_ERROR | 12009 | in PutSAPTree. Invalid node in treediff result | 
| LOG_ERROR | 12009 | in PutSAPTree. No acl perm | 
| LOG_ERROR | 12009 | in PutSAPTree.ModifySAP failed | 
| LOG_ERROR | 12009 | in PutSAPTree. Trying to modify a read-only node | 
| LOG_ERROR | 12009 | Cannot modify a read-only node | 
| LOG_ERROR | 12009 | Couldn't read old bind value | 
| LOG_ERROR | 12009 | in PutSAPTree.ModifySAP failed | 
| LOG_ERROR | 12009 | Can't replace the root / (session.cc)in PutSAPTree. GetFatherPath failed | 
| LOG_ERROR | 12009 | in PutSAPTree.AddChildSAP failed | 
| LOG_ERROR | 12009 | Can't replace the root / | 
| LOG_ERROR | 12009 | in PutSAPTree.DeleteSAPTree failed | 
| LOG_ERROR | 12009 | Error invalid operation type | 
| LOG_ERROR | 12009 | PutRootSAPTree failed in GetAggSAP | 
| LOG_ERROR | 12009 | No path provided | 
| LOG_ERROR | 12009 | Failed due to insufficient user permission | 
| LOG_ERROR | 12009 | Internal error while adding a child node! | 
| LOG_ERROR | 12009 | Internal error: while parsing query! | 
| LOG_ERROR | 12009 | No Parameter found for querying | 
| LOG_ERROR | 12009 | Parameter must be specified in a Container. | 
| LOG_ERROR | 12009 | ERROR ! No column names specified! | 
| LOG_ERROR | 12009 | Invalid or non existent home directory found ! | 
| LOG_ERROR | 12009 | CheckPermForInterNodes failed | 
| LOG_ERROR | 12009 | GetPathForUser failed | 
| LOG_ERROR | 12009 | Context doesn't exist ! | 
| LOG_ERROR | 12009 | In CheckPermForQuery. AclMatchAuth failed! | 
| LOG_ERROR | 12009 | in CheckPermForInterNodes. GetHomeDirForUser failed | 
| LOG_ERROR | 12009 | In CheckPermForInterNodes. AclMatchAuth failed! | 
| LOG_ERROR | 12009 | in CheckPermAndSet. GetPermissionForUser failed | 
| LOG_ERROR | 12009 | Non-existing path corresponding to global parameters | 
| LOG_ERROR | 12009 | Error in SystemBackUp. failed to acquire mutex. | 
| LOG_ERROR | 12009 | in RecurAddAcl. GetRelativePath failed ! | 
| LOG_ERROR | 12009 | Session::GetCommandsForUser. | 
| LOG_ERROR | 12009 | Empty peer gateway key | 
| LOG_ERROR | 12009 | Setting of peer gateway key failed | 
| LOG_ERROR | 12009 | in CheckReadPermOnParent. GetFatherPath failed | 
| LOG_ERROR | 12009 | in GetAbsBindPath. GetHomeDirForUser failed ! | 
| LOG_ERROR | 12009 | GetWacBoxVersion failed ! | 
| LOG_ERROR | 12009 | GetInterfaceAddress failed ! | 
| LOG_ERROR | 12010 | Failed to set SetVipSSLEphemeralKey | 
| LOG_ERROR | 12010 | Policy is bound to more than one QOS class | 
| LOG_ERROR | 12010 | Failed to set " SERVICE_APP_PROTOCOL " | 
| LOG_ERROR | 12010 | Failed to set " SERVICE_APP_PROTOCOL " on | 
| LOG_ERROR | 12010 | Adding qos class | 
| LOG_ERROR | 12010 | Setting qos class | 
| LOG_ERROR | 12010 | Unsetting qos class | 
| LOG_ERROR | 12010 | Duplicate application | 
| LOG_ERROR | 12010 | Failed to find back-end server in server list | 
| LOG_ERROR | 12010 | Failed to look up Secure Traffic Manager object | 
| LOG_ERROR | 12011 | Couldn't add paramSAP, name: | 
| LOG_ERROR | 12013 | Failed to allocate space for integer argument | 
| LOG_ERROR | 12013 | Failed to allocate space for float argument | 
| LOG_ERROR | 12013 | Failed to allocate space for long long argument | 
| LOG_ERROR | 12013 | Failed to allocate space for char string argument | 
| LOG_ERROR | 12014 | Unable to get import/export handle | 
| LOG_ERROR | 12014 | Unable to set error handle | 
| LOG_ERROR | 12014 | Couldn't get file handle | 
| LOG_ERROR | 12014 | Set file handle failed | 
| LOG_ERROR | 12014 | Couldn't ready curl for upload | 
| LOG_ERROR | 12014 | Couldn't set file size | 
| LOG_ERROR | 12014 | Unsupported method | 
| LOG_ERROR | 12014 | Couldn't set target | 
| LOG_ERROR | 12015 | SSL Version 3 enabled | 
| LOG_ERROR | 12015 | TLS enabled | 
| LOG_ERROR | 12015 | No key/cert bindings found | 
| LOG_ERROR | 12015 | Attempt to use unsupported key type | 
| LOG_ERROR | 12015 | Unable to extract certificate | 
| LOG_ERROR | 12015 | Unable to extract issuer certificate | 
| LOG_ERROR | 12015 | Unable to extract key | 
| LOG_ERROR | 12015 | Unable to extract exchange key | 
| LOG_ERROR | 12015 | Error extracting trusted certificate | 
| LOG_ERROR | 12018 | Internal Error | 
| LOG_ERROR | 12018 | Invalid Path Specified | 
| LOG_ERROR | 12019 | Unable to allocate memory | 
| LOG_ERROR | 12021 | in ParamCmp. Cant modify node attributes | 
| LOG_ERROR | 12021 | Incorrect permissions given to root role | 
| LOG_ERROR | 12021 | Cannot modify ACL for root node | 
| LOG_ERROR | 12021 | Cannot give write permissions for a read-only node. | 
| LOG_ERROR | 12021 | in TreeDiff::GetDiff. Invalid path passed ! | 
| LOG_ERROR | 12021 | in AggCmp. Cant modify node attributes | 
| LOG_ERROR | 12021 | managementSystemErrorMessage | 
| LOG_ERROR | 12021 | in GetDiff. Retrieved inv. node | 
| LOG_ERROR | 12021 | in GetDiff.AddInterNodes fail! | 
| LOG_ERROR | 12021 | in GetDiff. inv. node | 
| LOG_ERROR | 12021 | In GetDiff. invalid return from SAPCmp! | 
| LOG_ERROR | 12024 | Backup rule group cannot be the same as the primary rule group | 
| LOG_ERROR | 12027 | Value for " CACHE_SVC_MAX_OBJECT_SIZE " too large | 
| LOG_ERROR | 12028 | Invalid value for " NET_INTERFACE_OPERATION_STATUS " . Using default | 
| LOG_ERROR | 12028 | Unable to set media-mode | 
| LOG_ERROR | 12029 | Failed to create HTTP monitor | 
| LOG_ERROR | 12030 | Failed to look up primary server | 
| LOG_ERROR | 12030 | Failed to look up backup server | 
| LOG_ERROR | 12031 | Failed to add route on <mgmt-port> due to: netmask doesn't match route address | 
| LOG_ERROR | 12031 | Netmask doesn't match route address | 
| LOG_ERROR | 12031 | Modify Route: Unsupported operation | 
| LOG_ERROR | 12032 | Failed to add route | 
| LOG_ERROR | 12033 | Unsupported operation | 
| LOG_ERROR | 12038 | Unexpected REN_AGG | 
| LOG_NOTICE | 12040 | Processing messages in the list | 
| LOG_ERROR | 12041 | Connection NULL in NC_RemoteCaller::getResponseHandle | 
| LOG_ERROR | 12049 | Can not parse cluster info | 
| LOG_ERROR | 12049 | Can not send message to heartbeat. Heartbeat Socket is NULL | 
| LOG_CRIT | 12049 | Peer IP Address is NULL. Exiting | 
| LOG_CRIT | 12049 | $NC_HEARTBEAT_DIR not set. Exiting | 
| LOG_NOTICE | 12049 | Processing messages in the list failed. Ignoring the error | 
| LOG_NOTICE | 12049 | Starting main message processing loop | 
| LOG_NOTICE | 12049 | Initiating login to Local SAPD after updating configuration | 
| LOG_NOTICE | 12049 | Getting Cluster Information after updating configuration | 
| LOG_NOTICE | 12049 | Configuration database versions match. Setting contactPeer flag to true | 
| LOG_NOTICE | 12049 | Configuration database versions mismatch. Setting contactPeer flag to false. | 
| LOG_CRIT | 12049 | Can not relogin to SAPD. Exiting | 
| LOG_CRIT | 12049 | Going to maintenance mode | 
| LOG_CRIT | 12049 | $NC_INSTALL_ROOT not set. | 
| LOG_CRIT | 12049 | Failed to create cluster key. This will shutdown communication with the peer-node | 
| LOG_CRIT | 12049 | Failed to create peer-gateway key. This will shutdown communication with the peer-node | 
| LOG_CRIT | 12049 | Failed to create encryption keys for peer-peer communication | 
| LOG_ERROR | 12050 | Heartbeat Client closing socket | 
| LOG_ERROR | 12050 | Heartbeat Client can not open socket | 
| LOG_ERROR | 12050 | Heartbeat Client can not read message from Heartbeat Server | 
| LOG_ERROR | 12050 | Can not send message to Heartbeat | 
| LOG_ERROR | 12051 | The account has been disabled. Please contact your admin | 
| LOG_ERROR | 12051 | Only one more day left to expire your password. Please change your password now | 
| LOG_ERROR | 12051 | Your password is about to expire. Please change your password | 
| LOG_ERROR | 12053 | Failed to initialize signal handlers | 
| LOG_ERROR | 12053 | Failed to digest initial configuration | 
| LOG_ERROR | 12053 | Failed to bind transResponse socket on 127.0.0.1 | 
| LOG_ERROR | 12053 | Exec for switchtomaint.sh failed | 
| LOG_ERROR | 12053 | Termination requested by the signal handler | 
| LOG_ERROR | 12054 | GetCmdGrpXML failed | 
| LOG_ERROR | 12054 | sapIndex.AddFromXMLStr(..., \"nc:ncRoot\") failed | 
| LOG_ERROR | 12054 | Usage: sap_initdb xmlFile | 
| LOG_ERROR | 12054 | Failed to initialize the sessions DB | 
| LOG_ERROR | 12054 | Failed to initialize SAP DB | 
| LOG_ERROR | 12054 | Failed to set System Configuration Timestamp to 0 | 
| LOG_ERROR | 12054 | Failed to set Configuration Tree Timestamp to 0 | 
| LOG_ERROR | 12057 | Can't store vhid | 
| LOG_ERROR | 12057 | Updating virtual host id is not supported | 
| LOG_ERROR | 12058 | Sysmon Client closing socket | 
| LOG_ERROR | 12058 | Sysmon Client can not open socket | 
| LOG_ERROR | 12058 | Sysmon Client: cannot bind to Socket | 
| LOG_ERROR | 12058 | Sysmon Client can not read message | 
| LOG_ERROR | 12058 | Can not allocate memory for sysmon event message | 
| LOG_ERROR | 12058 | Can not allocate memory for sapd event message | 
| LOG_ERROR | 12058 | Unknown message received from Sysmon | 
| LOG_ERROR | 12058 | Unknown message to sysmon | 
| LOG_ERROR | 12066 | Socket::WritePktToSocket - sockfd == -1 | 
| LOG_ERROR | 12067 | Failed to look up associated application | 
| LOG_ERROR | 12067 | Adding Application | 
| LOG_ERROR | 12067 | Duplicate app key | 
| LOG_ERROR | 12067 | No app keys | 
| LOG_ERROR | 12067 | Failed find back-end server in server list | 
| LOG_ERROR | 12067 | No such object | 
| LOG_ERROR | 12068 | No rules | 
| LOG_ERROR | 12068 | Failed find back-end server in server list | 
| LOG_ERROR | 12070 | Invalid value specified for IPS_COOKIE_MODE), | 
| LOG_ERROR | 12073 | Duplicate User Realm name: "+authUserRealmName | 
| LOG_ERROR | 12073 | Failed to write userRealm Name "+authUserRealmName | 
| LOG_ERROR | 12073 | User Realm name doesn't exist | 
| LOG_ERROR | 12073 | Failed to delete User Realm name "+ realms_.GetRealmName | 
| LOG_ERROR | 12073 | Failed to delete User Realm conf file "+ realms_.GetRealmName | 
| LOG_ERROR | 12074 | InterfaceDependantKey | 
| LOG_ERROR | 12081 | Finalize succeeded! | 
| LOG_ERROR | 12083 | Failed to look up Secure Traffic Manager object | 
| LOG_ERROR | 12083 | No such object | 
| LOG_ERROR | 12085 | Invalid parameter length " IPS_WEBGATE_START_URL " | 
| LOG_ERROR | 12085 | Invalid parameter length IPS_WEBGATE_REDIRECT_URL | 
| LOG_ERROR | 12085 | Invalid parameter length " IPS_WEBGATE_COOKIE_NAME | 
| LOG_ERROR | 12085 | Invalid parameter length " IPS_WEBGATE_COOKIE_VALUE | 
| LOG_ERROR | 12085 | Invalid parameter length " IPS_WEBGATE_COOKIE_EXPIRES | 
| LOG_ERROR | 12085 | Invalid parameter length " IPS_WEBGATE_COOKIE_PATH | 
| LOG_ERROR | 12085 | Invalid parameter length " IPS_WEBGATE_COOKIE_DOMAIN | 
| LOG_ERROR | 12085 | Invalid parameter value " IPS_WEBGATE_COOKIE_SECURE | 
| LOG_ERROR | 12088 | Invalid parameter value <IPS_REDIRECT_STATUS> | 
| LOG_ERROR | 12088 | Invalid parameter value <IPS_REWRITE_STATUS> | 
| LOG_ERROR | 12089 | Invalid parameter value <IPS_BLOCK_SOAP_REQ > | 
| LOG_ERROR | 12090 | Error in ReconfigureSubPolicies mismatch in number of sub-policies | 
| LOG_ERROR | 12100 | Invalid sessionid specified for StartPktTrace | 
| LOG_ERROR | 12100 | Invalid port specified for Packet dump | 
| LOG_ERROR | 12100 | Invalid sessionid specified for StartPktTrace | 
| LOG_ERROR | 12102 | Maximum allowed groups exceeded | 
| LOG_ERROR | 12109 | Invalid value for < ACL_PROTOCOL > (Must be an integer between 0 and 255, inclusive) | 
| LOG_ERROR | 12109 | Unsupported operation ACL | 
| LOG_ERROR | 12197 | Failed to start Session Recording | 
| LOG_ERROR | 12197 | Failed to stop Session Recording | 
| Caching (CACHE) | ||
| LOG_NOTICE | 6001 | System Low on Memory: Adjusting Cache Parameters - Current Max:<Max Size>, High:<High Water Mark>, Safe<Safe Water Mark> | 
| LOG_NOTICE | 6001 | System Low on Memory: Adjusting Cache Parameters - New Max:<Max Size>, High:<High Water Mark>, Safe<Safe Water Mark> | 
| LOG_NOTICE | 6002 | Cache Purged | 
| LOG_NOTICE | 6003 | Cache purge failed: instance <Count>, thid <Thread ID>, table <Table ID>, target <Size>, collected <Freed Size> | 
| Load Balance (LB) | ||
| LOG_ALERT | 7005 | Server <IP Address>:<Port> is enabled | 
| LOG_ALERT | 7006 | Server <IP Address>:<Port> is disabled. New mode <Operational Mode> | 
| LOG_NOTICE | 7007 | Server <IP Address>:<Port> is created | 
| LOG_ALERT | 7008 | Server <IP Address>:<Port> is deleted | 
| LOG_ALERT | 7012 | Server <IP Address>:<Port> is enabled by configuration. | 
| LOG_ALERT | 7013 | Server <IP Address>:<Port> is disabled by configuration. | 
| Access Logs (WEBLOG) | ||
| LOG_WARN | 9001 | Configurations for start or stop time *MAY* not be proper. | 
| LOG_ERROR | 9003 | Error: Unable to establish control connection. | 
| LOG_ERROR | 9004 | Error: Unable to establish data connection | 
| LOG_ERROR | 9005 | Error: Unable to establish SSL control connection | 
| LOG_ERROR | 9006 | Error: Unable to authenticate the user | 
| LOG_ERROR | 9007 | Error: Unable to transfer data to ftp server: <IP Address> | 
| LOG_ERROR | 9009 | Connection to <IP Address> failed, error code = <Error Code> | 
| LOG_ERROR | 9009 | SSL Connection to <IP Address> failed | 
| LOG_ERROR | 9010 | Out of memory for formatting logs | 
| LOG_NOTICE | 9013 | Dropping logs, running low on memory | 
| LOG_ERROR | 9013 | Error in hash generation or encryption | 
| LOG_NOTICE | 9014 | Logging parameters are set for vip <IP Address>:<Port> | 
| LOG_ERROR | 9018 | Unable to log the request since FTP server is slow or unreachable | 
| LOG_ERROR | 9018 | Dropping logs since queue is full | 
| LOG_ERROR | 9019 | Signature generation of logs failed | 
| Shared Symmetric Key (SSKEY) | ||
| LOG_WARN | 41001 | Encryption Key is going to expire within <Number> days", REMAINING_DAYS_FOR_EXPIRY( pSharedKey->keyExpiryTimeout,curTimeInSecs) | 
| LOG_WARN | 41002 | Encryption Key has already expired | 
| BYPASS | ||
| LOG_ALERT | 46001 | Unit is switching to bypass mode | 
| LOG_NOTICE | 46002 | State set to bypass: stopping heartbeat | 
| LOG_NOTICE | 46003 | State set to normal: starting heartbeat | 
| Event Manager (EVM) | ||
| LOG_ERROR | 11001 | Event Manager startup failure: could not handle signals | 
| LOG_ERROR | 11007 | EnableSyslogService: create socket failed | 
| LOG_ERROR | 11008 | fopen <log_filename>: <error_description> | 
| LOG_ERROR | 11009 | <log_filename> write failed <error_description> | 
| Heartbeat (HB) | ||
| LOG_ERROR | 15001 | Heartbeat events dropped, queue is full | 
| LOG_ERROR | 15002 | Unable to bind to address | 
| LOG_ERROR | 15003 | Error sending packet | 
| LOG_ERROR | 15003 | Error receiving data From remote gateway | 
| LOG_ERROR | 15004 | Attempting to reinitialize the Heartbeat Server before closing | 
| LOG_ERROR | 15004 | Attempting to send data without Initialization | 
| Certificate (CERT) | ||
| LOG_NOTICE | 17001 | <ssl-function-name>: Trusted certificate expired: CN=<Common Name>, OU=<Org Name > | 
| LOG_NOTICE | 17001 | <ssl-function-name>: Trusted certificate expired: O=<Org Name> L=<Location> S=<State> C=<City> | 
| LOG_NOTICE | 17500 | Cert Initialization | 
| SSL and TLS (SSL) | ||
| LOG_NOTICE | 16001 | <ssl-function-name>: Base 0x<ssl-handle> - Access denied: received bad certificate signature | 
| LOG_NOTICE | 16001 | <ssl-function-name>: Base 0x<ssl-handle> - Access denied: failed to verify certificate signature | 
| LOG_NOTICE | 16001 | <ssl-function-name>: Base 0x<ssl-handle> - Access denied: certificate chain too long | 
| LOG_NOTICE | 16001 | <ssl-function-name>: Base 0x<ssl-handle> - Access denied: failed to decode certificate | 
| LOG_NOTICE | 16001 | <ssl-function-name>: Base 0x<ssl-handle> - Access denied: no certificate | 
| LOG_NOTICE | 16001 | <ssl-function-name>: Base 0x<ssl-handle> - Access denied: failed to validate certificate chain | 
| LOG_NOTICE | 16001 | <ssl-function-name>: Base 0x<ssl-handle> - Access denied: <Error Code> | 
| 16002 | SSL PMS Error | |
| 16003 | SSL DEC Error | |
| LOG_NOTICE | 16004 | <ssl-function-name>: Base 0x<ssl-handle> - Sending alert: <Alert-desc> (<Alert Code>) from [<IP Address>:<Port>] | 
| LOG_NOTICE | 16005 | <ssl-function-name>: Base 0x<ssl-handle> - Received alert: <Alert-desc> (<Alert Code>) from [<IP Address>:<Port>] | 
| 16006 | SSL FIN Error | |
| 16010 | SSL New Socket | |
| 16011 | SSL Delete Socket | |
| LOG_NOTICE | 16012 | <ssl-function-name>: Base 0x<ssl-handle> - No RSA private key available | 
| LOG_NOTICE | 16012 | <ssl-function-name>: Base 0x<ssl-handle> - Mismatched key size <Size> (expected <Size>) | 
| LOG_NOTICE | 16012 | <ssl-function-name>: Base 0x<ssl-handle> - Failed to get authority private key | 
| LOG_NOTICE | 16012 | <ssl-function-name>: Base 0x<ssl-handle> - Called on a client socket | 
| LOG_NOTICE | 16012 | <ssl-function-name>: Base 0x<ssl-handle> - Called on a server | 
| LOG_ERROR | 16013 | <ssl-function-name>: Out of memory | 
| LOG_ERROR | 16013 | <ssl-function-name>: Base 0x<ssl-handle> - Out of memory | 
| LOG_ERROR | 16013 | <ssl-function-name>: Socket 0x<sslsock-handle> - Out of memory | 
| LOG_NOTICE | 16014 | <ssl-function-name>: Incorrect server name: length should be between 0 and < length > | 
| 16015 | SSL Message Error | |
| LOG_ERROR | 16016 | <ssl-function-name>: Base 0x<ssl-handle> - Failed to schedule crypto command | 
| 16017 | SSL SEND Error | |
| 16018 | SSL RECV Error | |
| LOG_NOTICE | 16019 | < ssl-function-name >: Cannot configure more than <Number> certificate policies | 
| LOG_NOTICE | 16020 | <ssl-function-name>: Cannot configure more than <Number> trusted certificates per service | 
| LOG_NOTICE | 16021 | <ssl-function-name>: No available SSL version for client socket | 
| LOG_NOTICE | 16023 | <ssl-function-name>: Ephemeral Key changed | 
| LOG_NOTICE | 16024 | <ssl-function-name>: Base 0x<ssl-handle> - No ephemeral key available | 
| 16025 | SSL Content Type Mismatch | |
| 16026 | SSL DN Constraint | |
| 16027 | SSL Certificate Decode Failure | |
| 16028 | SSL Certificate Unsupported | |
| 16029 | SSL Certificate Invalid Time | |
| 16030 | SSL Client Renegotiation | |
| 16031 | SSL Handshake Failure | |
| 16040 | SSL Session Timed Out | |
| 16050 | SSL General Notice | |
| LOG_NOTICE | 16500 | SSL Initialization | 
| HTTP Proxy (HTTPSVC) | ||
| LOG_ERROR | 00000 | HttpRequestCtxDequeue Running out of contexts | 
| LOG_ERROR | 13100 | HttpServerParseRequest: Parse failed; Malformed version <request-buffer> | 
| LOG_ERROR | 13100 | HttpServerParseRequest: Parse failed; Unknown major number <request-buffer> | 
| LOG_ERROR | 13100 | HttpServerParseRequest: Parse failed; Unknown minor number <request-buffer> | 
| LOG_ERROR | 13100 | HttpServerParseRequest: Parse failed; Unknown method: <request-buffer> | 
| LOG_ERROR | 13100 | HttpServerParseRequest: Parse failed; Malformed URL <request-buffer> | 
| LOG_ERROR | 13100 | HttpServerParseRequest: Parse failed; Malformed line end <request-buffer> | 
| LOG_ERROR | 13101 | HttpClientParseResponse: Parse failed; Malformed version <request-buffer> | 
| LOG_ERROR | 13101 | HttpClientParseResponse: Parse failed; Unknown major number <request-buffer> | 
| LOG_ERROR | 13101 | HttpClientParseResponse: Parse failed; Unknown minor number <request-buffer> | 
| LOG_ERROR | 13101 | HttpClientParseResponse: Parse failed; Malformed status code <request-buffer> | 
| LOG_ERROR | 13101 | HttpClientParseResponse: Parse failed; Header: <request-buffer> | 
| LOG_ERROR | 13101 | HttpClientParseResponse: Parse failed; Malformed line end <request-buffer> | 
| LOG_WARN | 13103 | OnHttpServerSockRecv: Session timed out from <Client IP:Port> | 
| LOG_NOTICE | 13200 | Can not connect to server (< error-code >) for connection from: 0x< IP Address > | 
| LOG_NOTICE | 13200 | SSL connection to server for connection from: 0x< IP Address > failed | 
| LOG_NOTICE | 13200 | Error connecting to server (< error-code >) for connection from: 0x< IP Address > | 
| LOG_NOTICE | 13200 | Error opening SSL connection to server for connection from: 0x< IP Address > | 
| LOG_NOTICE | 13200 | SSL accept failed for connection from: 0x< IP Address > | 
| LOG_NOTICE | 13200 | Error switching connection from: 0x< IP Address > to SSL | 
| LOG_NOTICE | 13200 | Error accepting SSL connection from: 0x< IP Address > | 
| Web Authentication (WEBAUTH) | ||
| LOG_ERROR | 18203 | Unable to contact the authentication server, (RPC Queue full) | 
| LOG_ERROR | 18204 | Remote procedure call to authentication server timed out | 
| LOG_ERROR | 18205 | Login attempt failed for user <User ID> | 
| LOG_ERROR | 18206 | Changing password failed for user <User ID> | 
| LOG_NOTICE | 18207 | Added a realm:<Realm ID> | 
| LOG_ERROR | 18208 | Unable to add realm:<Realm ID> | 
| LOG_NOTICE | 18209 | Deleted a realm:<Realm ID> | 
| LOG_ERROR | 18215 | Error received from webauthd , <Error String> | 
| LOG_NOTICE | 18216 | Insert into ptrie - allocation failed (flags: 0x<internal-flags-value>, mem: <internal-mem-handle>) "Creating AuthzCache - inserting into ptrie failed(nodes: <internal-node-handle>, <internal-node-handle> | 
| LOG_NOTICE | 18217 | Client attempted to Logout without login session cookie\n | 
| LOG_WARN | 18218 | Invalid external policy store configured, realm name = <realm-name> | 
| Application Firewall (APS) | ||
| LOG_ERROR | 19003 | GetIpsUrlProfileLearningStats: error <Error_ID> | 
| LOG_NOTICE | 19031 | XML Firewall error: <error-string> ( offset: <offset number>, code: <error code> )",pErr->desc,( int )pErr->offset, pErr->code | 
| LOG_NOTICE | 19031 | XML Firewall error: Input validation | 
| LOG_NOTICE | 19031 | XML Firewall error: Attack pattern | 
| LOG_NOTICE | 19031 | XML Firewall error: Operation denied | 
| LOG_NOTICE | 19031 | Received error from Web Services Firewall module: error desc (<Error Id>: <error message> ) | 
| LOG_ERROR | 19032 | Failed to allocate NCFORMINFO buffer | 
| LOG_ERROR | 19032 | Unable to add session param to NCFORMINFO (no-name param) | 
| LOG_ERROR | 19032 | Failed to allocate NCFORMINFO buffer(resp) | 
| LOG_ERROR | 19032 | Unable to add session param to NCFORMINFO (multi-value) | 
| LOG_ERROR | 19032 | Failed to allocate buffer for response URL rewrite | 
| LOG_ERROR | 19032 | Failed to allocate buffer for form encryption | 
| LOG_ERROR | 19035 | PfCSRFProtection: No CSRF token found | 
| LOG_WARN | 19500 | Could not cloak match for <group name>. Value of Initial or Trailing Characters to Keep is too large | 
| LOG_WARN | 19500 | POST request with both Content-Length and Transfer-Encoding headers [ url: <URL|Malformed URL> ], dropped | 
| LOG_WARN | 19500 | No intrusion information for intrusion ID | 
| Cookie Security (COOKIE) | ||
| LOG_ALERT | 20003 | Cookie expires: Client <IP Address> | 
| LOG_ALERT | 20004 | Cookie auth failed: cookiename auth failed | 
| LOG_ALERT | 20005 | Cookie Length Overflow: Client <IP Address> | 
| LOG_ERROR | 20006 | Failed to allocate Shared Key context for cookie encryption | 
| CRL Daemon (CRL) | ||
| LOG_ERROR | 40001 | CRL File Download successfull | 
| LOG_ERROR | 40002 | CRL File Download failed | 
| FTP Proxy (FTPSVC) | ||
| LOG_ERROR | 21011 | Error while transferring data | 
| LOG_WARN | 21014 | <Internal Session ID> Invalid client ip-address (<IP Address>) specified with the port command, actual client ip-address is (<IP Address>) | 
| LOG_WARN | 21014 | <Internal Session ID> Invalid port (<Port>) specified with the port command, port value must be greater than 1024 | 
| LOG_WARN | 21014 | <Internal Session ID> Invalid ip-addr (<IP Address>) used to connect to listening ftp data socket, expected from (<IP Address>) | 
| LOG_ERROR | 21022 | Unable to allocate state control block for a session | 
| LOG_ERROR | 21022 | Unable to allocate memory for ftp session | 
| LOG_ERROR | 21022 | Out of memory | 
| LOG_ERROR | 21022 | <Service IP Address:Port>:Unable to allocate memory for PORT cmd to FTP server | 
| LOG_ERROR | 21022 | <Service IP Address:Port>:Unable to allocate memory for SSL verbs | 
| LOG_ERROR | 21023 | Unable to get an active back-end server | 
| LOG_ERROR | 21024 | Failed to create new socket | 
| LOG_ERROR | 21024 | Failed to create SSL socket | 
| LOG_ERROR | 21024 | Failed to create ssl client socket for data connection | 
| LOG_ERROR | 21025 | Unable to bind a server for data connection | 
| LOG_ERROR | 21025 | Unable to setup data connection | 
| LOG_ERROR | 21026 | Failed to connect to FTP server | 
| LOG_ERROR | 21026 | Unable to establish SSL control connection with the FTP server | 
| LOG_ERROR | 21026 | Unable to connect to FTP server <Server IP Address> | 
| LOG_ERROR | 21027 | Unable to accept SSL connection from FTP client | 
| LOG_ERROR | 21028 | Failed to send response to the client | 
| LOG_ERROR | 21028 | Failed to send control data to the server, because of small TCP windows | 
| LOG_ERROR | 21028 | Failed to send data to the FTP client on the data connection | 
| LOG_ERROR | 21029 | Failed to receive data from the FTP client on the data connection | 
| LOG_ERROR | 21029 | Failed to receive data from FTP server on the data connection | 
| LOG_ERROR | 21030 | Received bad response codes from the FTP server | 
| Compression (COMPRESS) | ||
| LOG_ERROR | 24001 | Compression request errored, <Error Code>, <Error String> | 
| LOG_ERROR | 24006 | Failed to initialize compression, switching back to no-compression mode | 
| Web Translation (WATREWR) | ||
| LOG_ERROR | 26051 | Rewrite Module: URL rewrite by both Url-Translation and Request Rewrite | 
| LOG_ERROR | 26052 | Rewrite Module: HTTP header rewrite by both URL-translation and Request Rewrite. Please go over your configuration to see if this can be avoided | 
| Network Socket (NET) | ||
| LOG_ERROR | 3001 | Failed to attach interface <Interface Name> | 
| 3002 | System Interface related | |
| LOG_NOTICE | 3003 | <Interface Name>: promiscuous mode enabled | 
| 3004 3005 | System Interface related | |
| LOG_ERROR | 3011 | rn_addmask: mask impossibly already in tree | 
| LOG_ERROR | 3011 | Mask for route not entered | 
| LOG_ERROR | 3012 | rn_delete <node-info>: Orphaned Mask <node-info> at <node-info> | 
| LOG_ERROR | 3013 | rn_init: radix functions require max_keylen be set | 
| 3014 | System Route related | |
| 3021-23 | QOS related | |
| 3031-48 | NC Sockets related | |
| TCP (NETINET) | ||
4031 4032  | INET IP related | |
| LOG_ERROR | 4033 | Can't find virtual host for route, dst = <IP Address> | 
| LOG_NOTICE | 4034 | ipflow to <IP Address> reached max refs | 
| LOG_NOTICE | 4034 | Copyright (c) 2001, 2002 Barracuda Inc. | 
| LOG_NOTICE | 4034 | Copyright (c) 1982, 1986, 1993 The Regents of the University of California | 
| 4035 - 4046 | INET IP related | |
| 4051 - 4053 | TCP connections related | |
| LOG_ALERT | 4054 | Detected a SYN attack, using SYN cookies | 
| 4055 - 4058 | TCP connections related | |
| 4071-86 | Forwarding related | |
| 4091-99 | NATting related | |
| 4001 | ICMP Redirect | |
| LOG_WARN | 4011 | arp request for <IP Address> failed with no memory | 
| LOG_ERROR | 4013 | <Host IP Address> is using my IP address <IP Address> | 
| LOG_ERROR | 4014 | Failed to find route for arp response to client <IP Address> | 
| LOG_WARN | 4015 | arp: <MAC Address> attempts to modify permanent entry for <IP Address> on <Interface Name> | 
| LOG_WARN | 4016 | arp_rtrequest: bad gateway value | 
| LOG_ERROR | 4017 | arpresolve: can't allocate info for <IP Address>, rt=<route> | 
| LOG_ERROR | 4017 | arp_rtrequest: malloc failed | 
| 4111-16 | UDP related | |
| 4131-141 | ICMP ERRORs related | |
| LOG_ERROR | 45006 | Socket between stm wrapper and Configuration agent failed...Cannot execute <command> command | 
| Symmetric Encryp. Decryp. (CRYPTO) | ||
| LOG_DEBUG | 5004 | Decrypt Failed | 
| Process Monitor (PROCMON) | ||
| LOG_WARN | 44001 | STM crash detected current state is: <STM State> state <Number> crashes in last <Time in Seconds> | 
| LOG_NOTICE | 44001 | Checking if configuration needs to be synchronized with peer system | 
| LOG_NOTICE | 44001 | Notifying peer system to check if configuration needs to be synchronized | 
| LOG_WARN | 44002 | Total retries: <Number> waiting for <Time in seconds> before next restart | 
| LOG_WARN | 44003 | Too many <Number> tries to restart unstable STM, switching to Failed state | 
| LOG_WARN | 44004 | Too many STM crashes switching to Unstable state, will attempt restart in <Time in seconds> | 
| LOG_NOTICE | 44005 | Attempting to restart STM and Eventmgr | 
| LOG_NOTICE | 44006 | Attempting to recreate the log DB | 
| LOG_ERROR | 44007 | Error : <Error code> encountered with stm start | 
| LOG_ERROR | 44008 | STM restart failed: switching to Failed state | 
| LOG_ERROR | 44009 | STM restart failed: switching to Failed state | 
| LOG_NOTICE | 44010 | STM restart succeeded: current state: Stable | 
| LOG_WARN | 44011 | shmget failed | 
| LOG_WARN | 44012 | number of stm worker threads is <Number of STM Threads>" | 
| LOG_WARN | 44013 | shmread error <Failure Error> | 
| LOG_WARN | 44014 | STM worker thread <Number> seems to be hung. Event count <Number> | 
| LOG_WARN | 44015 | STM seems to be hung. Killing STM | 
| LOG_NOTICE | 44016 | STM alive: switching from <STM State> to stable state | 
| LOG_WARN | 44017 | <Process Name> state is <Process State> | 
| LOG_ERROR | 44018 | bypass_hbeat.pl is dead restarting gpio and bypass_hbeat | 
| LOG_ERROR | 44019 | clamd is dead, restarting <Process Name> | 
| LOG_ERROR | 44019 | snmpd is dead, restarting <Process Name> | 
| LOG_ERROR | 44020 | profile agent is dead, restarting <Process Name> | 
| LOG_ERROR | 44021 | collectd is dead, restarting <Process Name> | 
| LOG_ERROR | 44022 | namemon is dead, restarting namemon | 
| LOG_ERROR | 44023 | config agent is dead, restarting config_agent and stm | 
| LOG_CRIT | 44024 | System highest temp has reached | 
| LOG_CRIT | 44025 | System is getting real hot | 
| LOG_CRIT | 44026 | System highest temp has reached | 
| LOG_CRIT | 44027 | System is getting real hot | 
| LOG_ALERT | 44028 | One of the CPU fans is dead | 
| LOG_ALERT | 44029 | One of the System fans is dead | 
| LOG_ALERT | 44030 | One of the System fans is dead | 
| LOG_ALERT | 44031 | Firmware storage exceeds 85% | 
| LOG_ALERT | 44032 | Mail storage exceeds 85% | 
| LOG_ALERT | 44033 | One of the RAID arrays is degrading. | 
| LOG_NOTICE | 44034 | <Interface Name>: link seems down | 
| LOG_ALERT | 44035 | <Interface Name>: link is down | 
| LOG_ALERT | 44036 | <Interface Name>: link is up | 
| LOG_NOTICE | 44001 | Checking if configuration needs to be synchronized with peer system | 
| LOG_NOTICE | 44001 | Notifying peer system to check if configuration needs to be synchronized | 
| LOG_ERROR | 44039 | heartbeat.pl is dead <Number>, restarting | 
| LOG_ERROR | 44040 | heartbeat.pl is in state D for <Number> tick(s). Ignoring the state | 
| LOG_ERROR | 44041 | cluster_manager is dead <Number>, restarting | 
| LOG_ERROR | 44042 | cluster_manager is in state D for <Number> tick(s). Ignoring the state | 
| LOG_ERROR | 44042 | Restarting spinal cord process since there may be an issue in connecting to Control Center | 
| LOG_ERROR | 44043 | Restarting ssh | 
| LOG_NOTICE | 44043 | Restarting syslog-ng process as it was down | 
| LOG_NOTICE | 44001 | Checking if configuration needs to be synchronized with peer system | 
| LOG_ERROR | 44044 | Configuration dispatcher is dead <Number>, restarting | 
| LOG_ERROR | 44045 | Configuration dispatcher is in state D for <Number> tick(s). Ignoring the state | 
| LOG_ALERT | 44046 | STM seems to be running high on Memory. Please contact to Barracuda Networks Support Center for analysis | 
| LOG_ALERT | 44047 | Memory Usage exceeds 70% | 
| LOG_NOTICE | 44048 | Monitoring links: <Link Name> | 
| LOG_NOTICE | 44049 | Started monitoring | 
| LOG_ALERT | 44050 | Log storage exceeds 85% | 
| LOG_ALERT | 44051 | High CPU Usage | 
| LOG_EMERG | 44850 | VNET_CONFIG' @message if $syslog ne 0; | 
| LOG_NOTICE | 44201 | Mode change: Hard bypass = <Hard Bypass Enabled> Bypass on Failure = <Soft Bypass Enabled> | 
| LOG_NOTICE | 44202 | Mode set to bypass Hard bypass = <Hard Bypass Enabled> Bypass on Failure = <Soft Bypass Enabled> | 
| LOG_NOTICE | 44203 | Changing Heartbeat bit state from <Old Hearbeat bit state> to <New Hearbeat bit state> | 
| LOG_NOTICE | 44204 | Mode set to never bypass | 
| LOG_ALERT | 44301 | Harddisk Failure | 
| LOG_ERROR | 44701 | Could not open pdf '<report>' because: $!\n | 
| LOG_ERROR | 44702 | Could not open html '<report>' because: $!\n | 
| LOG_ERROR | 44703 | Report not sent to <email address> | 
| CLUSTER MANAGER (CLRMGR) | ||
| LOG_NOTICE | 43001 | We are not yet in cluster mode. Could not calculate destination IP and destination Identity. Exiting | 
| LOG_NOTICE | 43001 | Invalid Role : <PRIMARY/BACKUP:self_role> specified in cluster.conf. Could not determine self role. Exiting | 
| LOG_ERROR | 43001 | Cluster.conf file is not existing...Exiting | 
| LOG_ALERT | 43001 | Peer device $g_peer_ip is UP | 
| LOG_ALERT | 43002 | Peer device $g_peer_ip is UP | 
| LOG_ALERT | 43003 | Peer device $g_peer_ip DOWN | 
| LOG_NOTICE | 43010 | Self assume received for <operational_mode> mode | 
| Monitor Check (CHECK_MON_LINK) | ||
| LOG_ERROR | 48302 | Couldn't connect to NTP server: <Server Name/IP Address> | 
| Barracuda Updates (UPDATE) | ||
| LOG_ALERT | 52001 | Energize update subscription is about to expire in <Number> days | 
| LOG_ALERT | 52002 | New attack definition version <Number> is available | 
| LOG_ALERT | 52003 | New firmware update is available Current Version = <current_version> Beta Version = <beta_version> | 
| LOG_ALERT | 52004 | New firmware update is available Current Version = <current_version> New Version = <new_version> | 
| LOG_ALERT | 52005 | Attackdef downloaded and applied on the appliance | 
| LOG_ALERT | 52006 | Attackdef downloaded and applied on the appliance | 
| LOG_ALERT | 52007 | New Virus definition update available.Current Version = <current_version>. New Version = <new_version> | 
| LOG_ALERT | 52010 | New Firmware update available.Current Version = <current_version>. New Version = <new_version> | 
| LOG_ALERT | 52011 | New Attack definition update available.Current Version = <current_version>. New Version = <new_version> | 
| LOG_ALERT | 52012 | New Virus definition update available.Current Version = <current_version>. New Version = <new_version>. | 
| BYPASS | ||
| LOG_ALERT | 44221 | Unit is switching to bypass mode | 
| LOG_NOTICE | 44222 | State set to bypass: stopping heartbeat | 
| LOG_NOTICE | 44223 | State set to normal: starting heartbeat | 
| LOG_NOTICE | 44201 | Mode change: Hard bypass = <Hard Bypass Enabled> Bypass on Failure = <Soft Bypass Enabled> | 
| LOG_NOTICE | 44202 | Mode set to bypass Hard bypass = <Hard Bypass Enabled> Bypass on Failure = <Soft Bypass Enabled> | 
| LOG_NOTICE | 44203 | Changing Heartbeat bit state from <Old Hearbeat Version> to <New Hearbeat Version> | 
| LOG_NOTICE | 44204 | Mode set to never bypass | 
| STM_WRAPPER | ||
| LOG_WARN | 45001 | Cannot execute <Command Name> Command. Exiting. | 
| LOG_WARN | 45002 | Configuration agent is not running. Cannot monitor <Command Name> command | 
| LOG_WARN | 45003 | command<Command Name> execution status = <Status> | 
| LOG_WARN | 45004 | Configuration agent crashed. Failed to execute <Command Name> command | 
| LOG_WARN | 45005 | Configuration agent is not running....Cannot execute <Command Name> command | 
| LOG_WARN | 45006 | Socket between stm wrapper and Configuration agent failed...Cannot execute <Command Name> command | 
| LOG_ERROR | 45007 | Failed to initialize STM | 
| LOG_NOTICE | 45008 | Successfully initialized STM | 
| LOG_NOTICE | 45008 | Creating db snapshot after initwac | 
| LOG_NOTICE | 45009 | Successfully stopped STM | 
| LOG_NOTICE | 45010 | <Failure Reason> | 
| LOG_INFO | 45011 | Procmon rollback :Loading at <Date> from DB snapshotlast successful digest | 
| LOG_NOTICE | 45012 | Rollback finished: success | 
| LOG_ERROR | 45013 | Rollback failed : Failed to restart STM | 
| LOG_NOTICE | 45014 | <Failure Reason> | 
| LOG_WARN | 45016 | Configuration size is <Current Config Size> Bytes which exceeds the <Max Config Size> Bytes safe limit. Please check your configuration. | 
| LOG_WARN | 45018 | System in failed state: attempting recovery for config | 
| LOG_ERROR | 45019 | STM startup failed. Retrying with blank config | 
| LOG_ERROR | 45020 | STM startup failed even with blank config. Exiting | 
| LOG_NOTICE | 45022 | Committing UI configuration | 
| LOG_NOTICE | 45024 | Killing STM for dumping core | 
| PROCESS SCHEDULE | ||
| LOG_WARN | 49001 | Scheduled Backup failed : System has locked key configuration | 
| Stateful Failover (SFO) | ||
| LOG_NOTICE | 25050 | Opening System State Transfer listening socket | 
| LOG_NOTICE | 25050 | Closing System State Transfer listening socket | 
| LOG_NOTICE | 25050 | Accepted System State Transfer connection sock | 
| LOG_NOTICE | 25100 | Unrecognised state pkt | 
| LOG_NOTICE | 25100 | Calling update system state function of module | 
| LOG_NOTICE | 25100 | Ignoring System State Transfer packet for unknown module | 
| LOG_NOTICE | 25150 | Opening Request State Transfer listening socket | 
| LOG_NOTICE | 25150 | Listening for Request State Transfer connections on socket | 
| LOG_NOTICE | 25150 | Request State Transfer listening socket | 
| Admin Management | ||
| LOG_ALERT | 51001 | <user_role> User has logged in | 
| LOG_ALERT | 51015 | Unable to reach Barracuda update server. Please check your network connectivity | 
| LOG_ALERT | 51002 | LOG Database is corrupted. Please contact Barracuda Support | 
| LOG_ALERT | 51002 | Summary Log Database is corrupt. Initializing DB recovery | 
| LOG_ALERT | 51005 | Backup failure notification | 
| LOG_ALERT | 51004 | FTP of access logs Failed. Reason:<message> | 
| LOG_ALERT | 51006 | Performance numbers for this unit is not available <box_model> | 
| LOG_ALERT | 51009 | Backup was successfully restored | 
| LOG_WARN | 51012 | Disabling reporting as we are connected to BRS | 
| LOG_WARN | 51012 | Enabling reporting as we are disconnected from BRS | 
| LOG_WARN | 51014 | Unable to reach Barracuda update server in last <time_frame> minutes | 
| LOG_NOTICE | 51003 | Error in logging to LOG Database.Please contact Barracuda Support | 
| LOG_NOTICE | 51013 | Connectivity to Barracuda update server restored | 
| Configuration Synchronization | ||
| LOG_NOTICE | 53003 | This configuration change was successfully committed on the peer system | 
| LOG_ERROR | 53004 | Failed sync configuration from namemon master node with serial : <namemon_master_node> | 
| LOG_NOTICE | 53005 | Starting sync configuration from namemon master node with serial : <namemon_master_node> | 
| LOG_NOTICE | 53006 | Completed sync configuration from namemon master node with serial : <namemon_master_node> | 
| LOG_NOTICE | 53007 | Not notifying peer devices since bootstrapping is not done yet. | 
| LOG_NOTICE | 53008 | Not syncing from best remote node:$best_remote_node since bootstrapping is not done yet |