It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda Web Application Firewall
Overview Documentation Training Certification Materials

Enabling Azure Accelerated Networking on the Barracuda Web Application Firewall

  • Last updated on

If you did not deploy the Barracuda Web Application Firewall from the marketplace with Azure Accelerated Networking initially enabled, perform the following steps to enable Accelerated Networking.

On existing devices, Azure Accelerated Networking can be enabled only through the CLI.

Enable Accelerated Networking

  1. Go to the Azure portal.
  2. Shut down the Barracuda Web Application Firewall virtual machine. If the machine was created in an availability set, all machines in this set must be shut down.
  3. Open Azure CloudShell.

    Networking.png

  4. Enter the following commands. Replace your network interface card and resource group name:

    az network nic update --name <name_of_NIC> --resource-group <resource_group_name> --accelerated-networking true
  5. Press Enter to run the command.
  6. On the virtual machine page, select Networking under Settings and check if Accelerated Networking is enabled.

    IP_Configuration.png
  7. Start the Barracuda Web Application Firewall virtual machine.