It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda XDR

Integrating Barracuda IDS Collector

  • Last updated on

This setup is for the XDR Collector only. If you are using a physical or virtual sensor, refer to Integrating Barracuda IDS.

To set up a Barracuda IDS Collector, do the following:

  • Enable Barracuda IDS Collector
  • Install the XDR Collector

Enable Barracuda IDS Collector

  1. In Barracuda XDR Dashboard, navigate to  Administration >  Integrations.
  2. On the Barracuda IDS Collector card, click Setup.
  3. Select the Enabled check box.
  4. Click Save.

Install the XDR Collector

When collecting logs from one or more applications, always set up the XDR Collector on a dedicated host server. Don't use an existing server because the amount of data produced by logs can impact critical infrastructure.