It seems like your browser didn't download the required fonts. Please revise your security settings and try again.
Barracuda Campus Barracuda Campus
Barracuda XDR
Overview Documentation Materials

Setting up Tanium Collector

  • Last updated on

This setup is for the XDR Collector only. If you are using a physical or virtual sensor, refer to Integrating Tanium Connect.

To set up Tanium Collector, do the following:

  • Enable Tanium Collector

  • Install the XDR Collector

Enable Tanium Collector

  1. In Barracuda XDR Dashboard, navigate to Administration >  Integrations.

  2. On the Tanium Collector card, click Setup.

    TaniumCard.png

  3. Select the Enable check box.

    TaniumEdit.png

  4. Click Save.

Install the XDR Collector

When collecting logs from one or more integrated data sources, always set up the XDR Collector on a dedicated host server. Don't use an existing server because the amount of data produced by logs can impact critical infrastructure.