Best Practice - Core System Configuration Files and Ports Overview

#######
## Systemwide options
## File is sourced by several start scripts
##
# start networking at all?
BOX_NETWORK="Y"
# Number of retries to bring up all devices, sometimes useful for token ring devices
NET_RETRY=0
# should the NGFW Subsystem be started ?
PHION_START="Y"
#for some historical reason: should the NetDB subsystem be started? 
#CAUTION: Activate only if you know very well what you are doing.
NETDB_START="N"
# for advanced Servers
START_ORA="N" #Y/N start ORACLE on BOOT
START_ADABAS="N" #Y/N start ADABAS on BOOT

• BOX_NETWORK – Do not change. If you do set it to N, the Barracuda CloudGen networking and the services depending on it will not start. The Barracuda CloudGen Firewall will not be functional if this option is set.
• NET_RETRY – Number of retries to establish a network link. 
• PHION_START – If set to N, the Barracuda CloudGen Firewall OS operative layer will not be started at all. The Barracuda CloudGen Firewall will not be functional if this option is set to N.
• NETDB_START – Only of use if you have a legacy unit with a NetDB database system on it.
• START_ORA and START_ADABAS – Only of use for a Master configuration server with an Oracle or ADABAS D database. 

The boxadm.conf file holds all information that does not need a network restart to be activated. In addition, it also holds information for Barracuda CloudGen Firewall box services. An example of an operative configuration file:

ACLLIST[] = 10.0.0.8/29 10.0.0.231
ACTBOXSERVICES = y
DNSSERVER[] = 10.1.103.179 10.1.100.204
DOMAIN = m086
ENABLESHOSTS = y
MAINADMIN = n
MASTER[] = 10.1.17.42
RID = 86
RMASTER[] = 10.1.17.42
RPASSWD = $1$someMD5encryption
SPASSWD = $1$someMD5encryption
STARTNTP = y
STATISTICS = y
SYNC = y
TMASTER[] = 10.1.16.21
TZONE = Europe/Vienna
UTC = y
[boxtuning]
FILEMAX = 32768
IDETUNING = y
INODEMAX = 65536
SYSTUNING = n

For an explanation of the parameters, see How to Configure Advanced Barracuda OS System Settings.

The boxnet.conf file holds all information that deals with network connections. These are the hostname and the network interfaces, IP addresses and routing information. Again, let us have a look on a sample file:

HOSTNAME = sega
[addnet_dmz]
BIND = n
CRIT = y
DEV = eth1
IP = 192.168.32.1
IPCHAINS = y
MASK = 8
PING = y
[addroute_default
]
DEST =
195.23.11.6
DEV =
FOREIGN = y
MASK = 32
PREF =
REACHIP[] =
SRC =
TARGET = 0.0.0.0
TYPE = gw
[addroute_QA]
DEST = 10.0.0.244
DEV = eth0
FOREIGN = y
MASK = 8
SRC = 10.0.0.8
TARGET = 192.168.10.0
TYPE = gw
[boxnet]
DEV = eth0
IP = 10.0.0.8
MASK = 8
[cards_eepro]
MOD = eepro100.o
MODOPTIONS[] =
NUM = 1
TYPE = eth
[cards_realtek]
MOD = rtl18139.o
MODOPTIONS[] =

Activation Scripts

There are two scripts that are intended to be started from the command line: 

• /etc/rc.d/init.d/phion (which is actually a link to /etc/phion/rc.d/phionrc).
• /etc/phion/bin/activate 

All other scripts should not be started on the command line but are invoked by the 2 scripts above.

Operative Layer

Static Data

The whole operative date resides in /opt/phion . 

The full configuration of a Barracuda CloudGen Firewall box is held under /opt/phion/config/active. The configuration files may be modified manually by a Barracuda Networks support engineer or by a specially trained system engineer. If you are not absolutely sure about what you are doing, do not change anything here.

Dynamic Data

Log files and statistics data reside in /var/phion. This directory has the following substructure: 

• /var/phion/logs –  All log files are stored here. You can read it with any editor.

  DO NOT write to it, DO NOT rename it, DO NOT put any files in here. Any manual action can result in strange behavior of the log interface.

• /var/phion/stat –  Root directory for the statistics data structure. The data files are Berkeley DB files in binary form. They can be viewed with the showstat utility (/opt/phion/bin/).

  Again: Do NOT change anything in this directory manually.

• /var/phion/logcache –  Home of the Log Access Files (*.laf). These are Berkeley DB files for fast access to large log files.

• /var/phion/run/<module>  – Services may store operational data in these directories.

Intervention on command line is generally not intended on the NGFW OS operative layer. Nevertheless, there is one powerful tool to steer the processes. It can be used to gather comprehensive information about system state, routing, servers, processes. Furthermore, it can start / stop / block / disable servers and box processes. It is called phionctrl and resides in /opt/phion/bin. For more information, see phionctrl.

Ports Overview

The following table enlists the ports of a Barracuda CloudGen Firewall / Control Center that are required for communication: