This article assumes that you have already successfully upgraded to firmware version 8.0.1/8.0.2/8.0.3.
Before You Begin
Important Notes Before Migrating
Header Reordering for VLANs and DHCP Relay Agent
Barracuda Firewall Admin
After updating a system, you must also download Firewall Admin with the same version. Firewall Admin is backward-compatible. That means you can manage 7.x and 8.x F-Series Firewalls and Control Centers with Firewall Admin 8.x.
Migration Path to 8.0.4
The following table lists all current firmware versions to which this article applies:
Target Version 8.0.4
Review Upgrade Requirements
Verify that your CloudGen Firewall or Control Center meets the upgrade requirements, and read the release notes for the firmware version.
Supported Models for Firmware Version 8.0.4
The following models will be capable of running firmware version 8.0.4:
Barracuda CloudGen F-Series and Control Center Models
F12 Rev A, F18 Rev A/B, F80 Rev A/B, F82 Rev A, F93 Rev A, F180 Rev A, F183, F183R Rev A, F193 Rev A, F280 Rev B, F380 Rev A/B, F400 Rev B/C (8/12 ports), F600 Rev C/D, F800 Rev B/C, F900 Rev A (only fresh install), F900 Rev B, F1000 Rev A, C400 Rev A, C610 Rev A
VF10, VF25, VF100, VF250, VF500, VF1000, VF2000, VF4000, VF8000, VC400, VC610, VC820, ProxMox running with KVM images
|Public Cloud||AWS, Azure, Google Cloud|
Standard Hardware Systems
A standard hardware system is a Barracuda CloudGen Firewall F-Series running on 3rd-party server hardware using an SF license. Consult the Barracuda Networks Technical Support to find out if your specific standard hardware is supported.
Disk Space Requirements
Upgrading to version 8.0.4 requires your disk partitions to have enough free disk space.
Firmware 8.0.4 will require the following partition spaces:
|Hard Drive Partition|
Disk Space Requirements
|/||Minimum 6 GB, 2 GB free|
|/phion0||1.5 GB free|
|/boot||Minimum 180 MB|
Migration Instructions for 8.0.4
When upgrading according to the migration path above, you must complete the migration steps listed below:
Step 1. (optional) Remove Virtual WAN Configuration
This step is necessary only if you have configured a connection to Microsoft Azure Virtual WAN.
In the following steps, you must remove the whole configuration for Azure Virtual WAN connections and re-enter all fields after the migration.
- Log into the CloudGen Firewall with Firewall Admin.
- Go to CONFIGURATION > Configuration Tree > Multi Range > your range > your cluster > Boxes > your Box > Advanced Configuration > Cloud Integration.
- Select Azure Virtual WAN in the left menu.
- Click Lock.
- In the Azure Virtual WAN Connections section, click the entry of your Virtual WAN and click x to remove it.
- Click Send Changes and Activate.
How to Migrate to Version 8.0.4
Download the appropriate download file.
If You Migrate from Version 8.0.1/8.0.2/8.0.3 to 8.0.4
- Go to the download portal https://dlportal.barracudanetworks.com/#/packages/5150/patch.GWAY-8.0.4-0218.tgz.
- Download the patch package.
Start the Update
You can now update the CloudGen Firewall or Control Center.
For more information, see Updating CloudGen Firewalls and Control Centers.