LAN Connections

You can configure one or more LAN connections and static routes on a site appliance.

Add a New LAN Connection

1. Go to https://se.barracudanetworks.com and log in with your existing Barracuda Cloud Control account.
2. In the left menu, click the Tenants/Workspaces icon.
3. From the drop-down menu, select the workspace containing your site. 
4. Go to Infrastructure > Sites. The Sites page opens.  
5. Select the site you want to edit. You can either search for the name or serial, or use filters to tailor the list of displayed sites. You can also simply scroll through the list.
6. Click on the arrow icon next to site you want to configure.
   
7. In the site menu, go to Settings > LAN and click Add LAN Interface.
   
8. The Add New LAN Interface window opens. Specify values for the following:
   • Name – Enter a name for your LAN.
   • Port – Select a port from the drop-down list where the LAN is attached to. Note: Port 1 is reserved for high availability.
   • Virtual LAN ID (Optional) – If required, enter the Virtual LAN ID this interface is connected to.
   • IP Address – Enter the IP address.
   • Netmask – Enter a number between 0 and 32 for the subnet mask.
   • HA Failover – Only available in a High Availability cluster. Click to enable. For more information, see How to Enable Interface Monitoring in a High Availability Cluster.
     
9. Click OK.
10. Click Save.

Edit an Existing LAN Connection

1. Go to https://se.barracudanetworks.com and log in with your existing Barracuda Cloud Control account.
2. In the left menu, click the Tenants/Workspaces icon.
3. From the drop-down menu, select the workspace containing your site. 
4. Go to Infrastructure > Sites. The Sites page opens.
5. Select the site you want to edit. You can either search for the name or serial, or use filters to tailor the list of displayed sites. You can also simply scroll through the list.
6. Click on the arrow icon next to site you want to edit.
   
7. In the site menu, go to Settings and select the LAN tab.
8. Click on the pencil icon next to the LAN interface you want to edit.
   
9. The Edit LAN Interface window opens. Edit the value you are interested in.
10. Click OK.
11. Click Save.

Remove an Existing LAN Connection

1. Go to https://se.barracudanetworks.com and log in with your existing Barracuda Cloud Control account.
2. In the left menu, click the Tenants/Workspaces icon.
3. From the drop-down menu, select the workspace containing your site. 
4. Go to Infrastructure > Sites. The Sites page opens.
5. Select the site you want to remove. You can either search for the name or serial, or use filters to tailor the list of displayed sites. You can also simply scroll through the list.
6. Click on the arrow icon next to site you want to configure.
   
7. In the site menu, go to Settings and select the LAN tab.
8. Click on the trash can icon next to the LAN interface you want to remove.
   
9. The Delete LAN Interface window opens.
   
10. Click OK to confirm.
11. Click Save.

Further Information

• For more information on HA failover, see How to Enable Interface Monitoring in a High Availability Cluster.
• For more information on the DHCP service, see DHCP Service.
• For more information on static routes, see How to Create a Static Route.